Table of Contents
Advertisement
Connecting devices
Learn the information and procedures for connecting external devices to the projector.
Communication and input ports are located on the projector side input panel. When connecting
devices, you can route cables through the opening in the frame to the side input panel or directly to
the video option cards and MCPU. The image below shows the video option card slot numbers and the
MCPU panel.
Input signal devices are connected to the video option cards and the option card slot numbers are
important for some types of input signals. Communication devices are connected at the MCPU panel.
SLOT 1
SLOT 3
Input video mapping
Video input mapping depends on the type of cards used for the Four-Port or Two-Port input
configurations.
Four-Port: 3GIC, TDPIC, THIC cards
View the video quadrant mappings for the 3GIC, TDPIC, and THIC Four-Port input configurations.
Four-Port input configuration—Two cards (1)
Slot 1
Slot 1
Slot 2
Slot 2
Four-Port input configuration—Two cards (2)
Slot 3
Slot 3
Roadie 4K35 Quick Start Guide
020-101671-04 Rev. 1 (01-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
SLOT 2
MCPU
SLOT 4
1-In
2-In
1-In
2-In
1-In
2-In
Quadrant
Top left
Bottom left
Top right
Bottom right
Quadrant
Top left
Bottom left
Columns
1 (left most)
2
3
4
Columns
1 (left most)
2
27
Advertisement
Table of Contents
