Led Expected Behavior On Power Up; Turning The Projector Off - Christie Roadie 4K35 Quick Start Manual

LED expected behavior on power up

Learn the expected behavior of the projector LED and the MCPU board power LED on power up.
Action/Event
Applying AC power to the projector
head
Within the first second
At approximately 30 seconds
At approximately 50 seconds
At approximately one minute and 15 seconds, the touch panel controller indicates that it is connected
and shows the home page.

Turning the projector off

When powering off in preparation for inspection or maintenance, always disconnect from AC, and set
the projector breaker and lamp power supply breakers to the off position.
1. On the touch panel controller, tap the Home tab.
2. Tap Power.
Roadie 4K35 Quick Start Guide
020-101671-04 Rev. 1 (01-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Projector LEDs
Solid red
Solid green
Solid yellow
Solid red
Solid green
Solid yellow
Off red
Blinking green
Blinking yellow
Off/blinking red
Solid yellow
Off green
MCPU board power LED
Yellow
Blinking green
Blinking green
Solid green
Operation
33