Table of Contents
Advertisement
Indicates the presence of a hot surface. To avoid personal injury, always allow the projector to cool
down for a minimum of 10 minutes before performing maintenance or service procedures.
Indicates the presence of an electrical shock hazard. To avoid personal injury, always disconnect all
power sources before performing maintenance or service procedures.
Indicates the presence of an electrocution hazard. To avoid personal injury, always disconnect all
power sources before performing maintenance or service procedures.
Indicates the presence of moving fan blades. To avoid personal injury, keep hands clear and loose
clothing tied back. Always disconnect all power sources before performing maintenance or service
procedures.
Indicates exposure to bright light. To avoid personal injury, never look directly at the light source.
Indicates the presence of an explosion hazard. To avoid personal injury, always disconnect all power
sources and wear Christie approved protective clothing.
Indicates the presence of a fire hazard. To avoid personal injury and property damage, always adhere
to the instructions described in this manual.
Always disconnect all power sources before performing maintenance or service procedures.
See the product user manual for specific information and directions.
See the product service manual for specific information and directions.
Roadie 4K35 Quick Start Guide
020-101671-04 Rev. 1 (01-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Never look directly into the projector lens. The
extremely high brightness can cause permanent eye
damage.
Indicates possible optical radiation emitted from the
product.
Introduction
8
Advertisement
Table of Contents
