Table of Contents
Advertisement
6. Re-attach the front panel.
Adjusting the projector tilt and level
Adjust the projector tilt to fill the maximum amount of screen while minimizing keystone. Lens offset
can be used to center the image in the center of the screen.
Warning! Failure to comply with the following could result in death or serious injury.
•
TIP HAZARD! Always use the rear safety strap to prevent the product from tipping.
•
TIP HAZARD! Do not over-extend the product's feet. Ensure several threads from each foot
remain engaged in the product's baseplate.
Notice. Failure to comply with the following may result in property damage.
•
Do not tilt the product more than ±15 degrees.
1. Secure a safety lifting strap rated to handle the projector weight at the rear of the projector.
2. Hoist up the projector.
3. To adjust the vertical or horizontal position of the projector, extend or retract the adjustable
feet on the bottom of the projector (A).
Roadie 4K35 Quick Start Guide
020-101671-04 Rev. 1 (01-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Installation and Setup
22
Advertisement
Table of Contents
