Orienting The Projector In Portrait Mode - Christie Roadie 4K35 Quick Start Manual

8. Calibrate the lens motors.

Orienting the projector in portrait mode

Change the orientation of the projector to portrait.
1. Install the projector in the Roadie 4K frame (P/N: 129-115108-XX) according to the
installation instructions provided with the frame.
2. Orient the projector in the frame with the lamp door facing downward (as shown).
The maximum tilt angle is ±15 degrees.
3. Perform a lamp alignment.
Do not transfer the projector in portrait mode orientation. Return the projector to landscape
orientation before moving.
Roadie 4K35 Quick Start Guide
020-101671-04 Rev. 1 (01-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Installation and Setup
26