Installing More Than One Washer - GIRBAU HS-6013 Installation Instructions Manual

2.5. Installing more than one washer

If the installation calls for more than one washer, align them with each other.
The minimum distance between adjacent machines and the user and maintenance areas (values I, S and T
of Figure 2.4) are specified on the table below.
Check the dimensions of the drain box and the drain pipe on the table below.
Positioning conditions (Fig. 2.4)
DISTANCE BETWEEN
(RECOMMENDED)
I
(Commercial and Industrial laundries)
DISTANCE BETWEEN MACHINES (MINIMUM)
(Coin-op laundries)
S
WORKING AREA
T
REAR MAINTENANCE AREA (*1)
A
DRAIN BOX

DRAIN PIPE (x1; x2; x3)
*1. Double drain kit washers: figure T must measure 600 mm (23.6 inch) minimum
Transport and location
MACHINES
mm (in)
mm (in)
mm (in)
mm (in)
mm
in
 mm (in)
100 - 250 (4 - 10)
10 (0.4)
1000 (39.4)
500 (19.7)
300 x 300 x 250 (H)
12" x 12" x 10" (H)
100; 150; 180 (4; 6; 7)
23
Fig. 2.4
Cod.nº 429043
Rev. 15/1215