Table of Contents
Advertisement
Making Calls
2.1.16 MenuCards Before and During a Call
When your telephone is in the idle or the connection state, a short press of Men-
uCard key
provides you with state-dependent MenuCards displaying fre-
quently used features you can activate.
Examples
Another telephone in your pick-up group rings, and you want to answer the call.
Lift the handset, press MenuCard key
with
. You are now connected to the caller.
Alternatively, let us assume the line you call is busy and you want the person with
this number to call you back. When you hear the busy signal, press the MenuCard
key
and confirm
The state-dependent MenuCards are illustrated at the end of each of the following
sections.
2.1.17 MenuCard "Selection" in the Idle State
Press (but do not hold down) the MenuCard key
already lifted the handset), then select ...
Unpark call
: Consecutively unparks one or more connections which you have
previously parked, for instance to make enquiries or to forward calls (see Men-
uCard "Conversation" starting on page 47). Select the parked call desired from the
list offered. Confirm with the key
Pick-up
: Accepts a call for another telephone in your pick-up group.
Pick-up select...
telephone number of the other telephone. If the other telephone is already in the
call state (e.g. an answering machine is in announcement mode), you pick up the
call. The subscriber for whom you picked up the call must belong to a user group
for which "Call removal" authorisation is activated, otherwise "Pickup selective" is
not possible.
42
Callback
with
Note: As a rule, the features are only available to you if they
can actually be executed.
: Accepts a call for any other telephone. To do this, enter the
Pick-up
, select
.
(this also works if you have
.
General Functions
and confirm this
Advertisement
Table of Contents
