Table of Contents
Advertisement
System Telephones on the OpenCom 100 / Aastra 800
When the telephone is idle, you can see the subscriber's name or the telephone
number – as assigned to the telephone in the Configurator of the Web console –
as well as the time (the OpenPhone 65 also displays the day of the week and the
date). If more than one key is assigned a telephone number, the assignment of the
call key 1 is always the one displayed.
For the system telephones OpenPhone 61/OpenPhone 63, the system adminis-
trator can adjust the setting so that the date is shown instead of the user name.
The OpenPhone 65 display
During a call, the current charge counter and annotation texts are displayed (if
configured). During an enquiry call you will see the number of the enquiry call you
dialled.
1.4.3 Key Lines
The display next to the keys is assigned to them on a line-by-line basis. Depending
on the type of key, the following display texts are shown. On the OpenPhone 61
the display always shows the active line.
1 Call key in idle state: internal telephone number or a user-assigned text.
2 Call key during dial and connection state: dialled telephone number.
3 Destination key with names programmed: programmed name.
Note: The call and seizure states are identified by additional
symbols on the call keys. For details, refer to the section enti-
tled Making Calls starting on page 34.
Display and MenuCards
23
Advertisement
Table of Contents
