Table of Contents
Advertisement
Making Calls
Your telephone can have a call-waiting queue even if it belongs to a subscriber
group, where it simultaneously affects call forwarding.
If several telephone numbers are configured for your telephone (e.g. on trunk or
team keys), separate call-waiting queues are used for each number.
On the OpenPhone 65 incoming calls are signalled by means of a short tone; they
are also indicated on the display. If there are calls in the queue, the level indicator
appears at the beginning of the second line of the OpenPhone 65 display. If
several telephone numbers with call-waiting queues are configured for your tele-
phone, the total number of entries appears.
2.1.4 Block Dialling/Automatic Dialling
If you activate the menu item
Phoneƒsettings
digits to them, if necessary) without lifting the handset. The number is displayed in
the Info line. Entries from the redial stack, the call list and the telephone book that
are to be dialled using
have selected is not dialled until you lift the handset or press the hands-free key
. It is useful to activate the "Block dialling" feature when using a headset (see
the section entitled MenuCard "Phone Settings" starting on page 89).
If block dialling is switched off, the telephone switches to hands-free mode or
open-listening mode (OpenPhone 61) as soon as you enter a call number and dial
it.
Block Dialling and Headset Operation
It is useful to activate the "block dialling" feature when using a headset. Once
block dialling has been activated and the headset switched on, the phone imme-
diately switches over to headset operation and the call number is dialled when
you enter a number on the phone.
Dialling a Different User or a Different Terminal
You can also use your system phone for dialout with a headset. To do so, save a
destination call number on your system phone (via the MenuCard
2ƒDial: 0ƒRemote dialling
the menu entry
The saved call number will be dialled automatically when you press the headset
key within 30 seconds. After 30 seconds, the dialout will be deactivated automati-
cally.
36
En-blocƒdialling
, you can enter all telephone numbers (and correct or add
also appear in the Info line first. The number you
General Functions
in the MenuCard
Connections
, please refer to page 94 also).
,
Advertisement
Table of Contents
