Table of Contents
Advertisement
Making Calls
2.4.4 MenuCard "Subscr (Subscriber) on hold"
You are making an internal or external enquiry call ...
Press (but do not hold down) the MenuCard key
Subscr on hold
from the
Transfer
: You connect the subscriber on hold to the subscriber with whom you
are currently speaking.
Conference
: This initiates a three-party conference.
Toggle
: This function enables you to switch between the subscriber with whom
you are currently speaking, and the one with whom you last spoke.
Park call
: You can park one or more calls and make other phone calls in the
meantime. (see MenuCard "Conversation" starting on page 47). The system offers
the next available parking spot (0-9, * or #). Confirm with the key
Door opener
: You activate the door opener.
2.4.5 Internal/External Three-Party Conference
You have dialled an internal or external enquiry call (see the section entitled
Enquiry/Toggling by means of the R-Key or Another Call Key starting on page 54).
G
If the subscriber answers, inform them of the conference and select the
Conference
menu item from the MenuCard
ference is started.
h/
End the conference by hanging up or pressing the disconnect key (on
the OpenPhone 63 and the OpenPhone 65).
If you wish to speak to one of the conference participants separately again or
remove one of them,
56
MenuCard:
Note: Interconnecting the two conference participants or
removing one of them from the conference is only possible
using the appropriate menu item in the MenuCard. 3-party
conference connections are not available.
Enquiry, Toggling, Transfer and Conference
, then select the following
Subscriber on Hold
.
. The con-
Advertisement
Table of Contents
