Table of Contents
Advertisement
System Telephones on the OpenCom 100 / Aastra 800
1.4
Display and MenuCards
1.4.1 Changing the Language
Use the following procedure to set the display language (only on the
OpenPhone 63 and the OpenPhone 65):
1. Press the key
2.
Using the arrow keys, scroll to the desired setting.
3. Confirm the setting with the
In the Main menu you can use the
language.
4. First you select the entry
5.
Use the arrow key to scroll to the desired setting.
On the OpenPhone 61 you use the
6. Confirm the setting with the
1.4.2 Info Line(s)
The OpenPhone 63 display
The first (and on the OpenPhone 65 the second) line of the display shows
additional current information. The line shown on the single-line display of the
OpenPhone 61 is the currently active one. In the second line of the OpenPhone 65
display you can, for example, view the capacity status of a call queue. If there is an
entry in the phone book for the called subscriber (see also page 97), name and
call number are displayed alternately in the calling state.
22
(long press).
key.
4 Phone settings
8 Display
key.
MenuCard to change the
Language
and then
and
keys.
Display and MenuCards
.
Advertisement
Table of Contents
