Configuring Mld Snooping Policies; Configuring An Ipv6 Multicast Group Policy - HP MSR1002-4 Configuration Manual

Setting the 802.1p priority for MLD messages globally
Step
1. Enter system view.
2. Enter MLD-snooping view.
3. Set the 802.1p priority for
MLD messages.
Setting the 802.1p priority for MLD messages in a VLAN
Step
1. Enter system view.
2. Enter VLAN view.
3. Set the 802.1p priority for
MLD
VLAN.

Configuring MLD snooping policies

Before you configure MLD snooping policies, complete the following tasks:
•
Enable MLD snooping for the VLAN.
•
Determine the ACL used by the IPv6 multicast group policy.
•
Determine the maximum number of IPv6 multicast groups that a port can join.

Configuring an IPv6 multicast group policy

This feature enables the device to filter MLD reports by using an ACL that specifies the IPv6
multicast groups and the optional sources. It is used to control the IPv6 multicast groups that receiver
hosts can join.
Configuration restrictions and guidelines
When you configure an IPv6 multicast group policy, follow these restrictions and guidelines:
•
This configuration takes effect on the IPv6 multicast groups that ports join dynamically.
•
You can configure an IPv6 multicast group policy globally for all ports in MLD-snooping view or
for a port in interface view. For a port, the port-specific configuration takes priority over the
global configuration.
Configuration procedure
To configure an IPv6 multicast group policy globally:
Step
1. Enter system view.
2. Enter MLD-snooping view.
3. Configure an IPv6 multicast
group policy globally.
To configure an IPv6 multicast group policy on a port:
Command
system-view
mld-snooping
dot1p-priority priority
Command
system-view
vlan vlan-id
mld-snooping
messages in the
priority
dot1p-priority
Command
system-view
mld-snooping
group-policy
ipv6-acl-number
[ vlan vlan-list ]
271
Remarks
N/A
N/A
By default, the 802.1p priority for
MLD messages is not set.
Remarks
N/A
N/A
By default, the 802.1p priority for
MLD messages is not set.
Remarks
N/A
N/A
By default, no IPv6 multicast
group policies exist, and host can
join any IPv6 multicast groups.