Status Display; Display Examples - Mitsubishi Electric MR-J2S-A Instruction Manual

6. DISPLAY AND OPERATION

6.2 Status display

The servo status during operation is shown on the 5-digit, 7-segment LED display. Press the "UP" or
"DOWN" button to change display data as desired. When the required data is selected, the corresponding
symbol appears. Press the "SET" button to display its data. At only power-on, however, data appears after
the symbol of the status display selected in parameter No. 18 has been shown for 2[s].
The servo amplifier display shows the lower five digits of 16 data items such as the servo motor speed.

6.2.1 Display examples

The following table lists display examples.
Item
Forward rotation at 3000r/min
Servo motor
speed
Reverse rotation at 3000r/min
Load inertia
15.5 times
moment
11252pulse
Multi-
revolution
counter
12566pulse
Status
Reverse rotation is indicated by " ".
Negative value is indicated by the lit decimal points in the upper four
digits.
6 - 2
WWW.NNC.IR
Displayed data
Servo amplifier display
Lit