Mitsubishi Electric MR-J2S-A Instruction Manual page 287

13. OPTIONS AND AUXILIARY EQUIPMENT
(2) Selection example
Indicated below is an example of selecting a leakage current breaker under the following conditions.
2mm 5m
2
NV
Servo
amplifier
MR-J2S-60A
Ig1
Use a leakage current breaker generally available.
Find the terms of Equation (13.1) from the diagram.
5
Ig1 20 0.1 [mA]
1000
5
Ig2 20 0.1 [mA]
1000
Ign 0 (not used)
Iga 0.1 [mA]
Igm 0.1 [mA]
Insert these values in Equation (13.1).
Ig 10 {0.1 0 0.1 1 (0.1 0.1)}
4.0 [mA]
According to the result of calculation, use a leakage current breaker having the rated sensitivity
current (Ig) of 4.0[mA] or more. A leakage current breaker having Ig of 15[mA] is used with the NV-
SP/SW/CP/CW/HW series.
2mm 5m
2
Servo motor
M
HC-MFS73
Iga Ig2 Igm
13 - 58
WWW.NNC.IR