Configuration - DETEWE opencom 105 Mounting And Commissioning Manual

Configuration

Configuration and programming of
the OpenCom 100 is performed by
the Configurator, a special software
application integrated into the sys-
The OpenCom 105 Web console
Using the Web console, you can:
perform the initial configura-
■
tion of the OpenCom 100,
configure users of the
■
OpenCom 100 and authorise
them to use certain system serv-
ices,
carry out further
■
system maintenance,
use PC-supported telephony
■
functions,
read out call charge information,
■
Configuration
tem. The Configurator is operated
via the Web console, which can be
run on any PC connected to the
OpenCom 100.
access the OpenCom 100 tele-
■
phone book.
The Web console has an integrated
online help function that offers com-
prehensive information on configu-
ration and maintenance of the
OpenCom 100 (see Loading the On-
line Help starting on page 56).
Note: In order to use all the new
system software functions, we recom-
mend that you download the latest
software from our Web site at
http://www.detewe.com.
For the initial configuration you can
connect the PC to the OpenCom 100
45