Opencom 100 - DETEWE opencom 105 Mounting And Commissioning Manual

The list of entries found should
now display the address from
the central telephone book.
USB DECT Box on the OpenCom 100
General Information
The USB DECT Box provides a PC with
a wireless ISDN data connection
(DECT). The Box is connected to the
PC via the USB interface and uses the
RFP 21/23 to create a connection to
the OpenCom 100 and its network,
to the telephone network and to the
Internet.
Note: Up-to-date information on
the USB DECT Box can be found at
http://www.detewe.de/.
Installation and
Configuration
1. Connect the RFP 21/23 to a free
U interface on the
pn
OpenCom 100. Instructions on
how to do this can be found in
the section Upn Ports starting on
page 24.
2. Configure the RFP 21/23 in the
Configurator, using the PBX
Configuration: Ports: U
menu.
Configuring the PC Software
Note: Only users can be found for
whom an internal telephone number
has been configured.
3. Install the software of the USB
4. Create a new DECT device of the
5. Check the USB DECT Box in. Fur-
6. Assign a user to the telephone
pn
USB DECT Box on the OpenCom 100
DECT Box and then connect the
USB DECT Box to your PC. Fur-
ther information on this can be
found in the corresponding
chapter of the "USB DECT Box"
manual (which is included with
the USB DECT Box).
type USB DECT Box in the Con-
figurator (menu PBX Configu-
ration: Ports: DECT-PP) and as-
sign a telephone number for the
data port.
ther information on how to do
this can be found in the corre-
sponding chapter of the "USB
DECT Box" manual and in the
online help provided in the

OpenCom 100.

numbers of the USB DECT Box in
the Configurator (menu User
Manager: User).
109