Configuration Guide - DETEWE opencom 105 Mounting And Commissioning Manual

Configuration Guide

The Configuration Guide contains a
series of flowcharts that will help
you to plan the configuration of the
OpenCom 100 and guide you
through the necessary settings step
by step, focusing on the network set-
tings. The individual charts are sum-
marised below:
Note: Settings for mail and ISP and
RAS access are only possible by re-
leasing the OpenCom 100 IP pack-
age on the Web console Configurator
in the SYS Configuration: Licences
menu.
Overview: This chart gives you
■
an overview of the initial config-
uration of the OpenCom 100.
Configuring PBX Ports: This
■
chart shows you the necessary
steps for configuring ports and
terminals.
Configuring Easy Access: This
■
chart guides you through TCP/IP
settings for the OpenCom 100.
Configuring ISP Settings: These
■
instructions support you in con-
figuring the Internet access.
Configuring RAS Settings: This
■
chart guides you through the
configuration of the RAS set-
tings.
Configuration Guide
Configuring LAN-to-LAN Set-
■
tings: This chart guides you
through the configuration of the
LAN-to-LAN settings.
Configuring E-Mail: This dia-
■
gram tells you how to create the
requirements needed for config-
uring the OpenCom 100 e-mail
access function.
Configuring E-Mail Access: This
■
overview provides instructions
on configuring the
OpenCom 100 e-mail access
server.
111