DETEWE opencom 105 Mounting And Commissioning Manual page 128

rectly via the remote data transfer
network or indirectly via RAS access
on the OpenCom 100. For direct ac-
cess you can directly dial any pro-
vider. Indirect access uses the rout-
ing function of the OpenCom 100,
accompanied by the configured se-
curity features, for example.
Directly via remote data transfer
network
If the Internet is accessed directly via
the remote data transfer network,
make sure that
the remote data transfer net-
■
work is properly installed on
your PC and that the correct ISP
access data is configured,
the internal number used by the
■
OpenPhone 25/27 to establish
the data connection is config-
ured for outgoing call distribu-
tion (Configurator, PBX Config-
uration: Call Distribution:
Outgoing menu).
Indirectly via RAS access
If the Internet is accessed indirectly
via RAS, the system administrator
should make sure that:
permission has been given for
■
Internet access via RAS (Config-
urator, Net Configuration: Safe
Access menu),
an internal number is configured
■
for RAS access (Configurator,
126
Internet
Net Configuration: Connec-
tions: RAS menu),
your user group has been
■
granted RAS access rights (Con-
figurator, User Manager: User
Groups menu).
For information on the installation of
software and on configuring Inter-
net access, refer to the
"OpenPhone 25" user guide or to the
"OpenPhone 27" user guide.
Frequently Asked Questions