Table of Contents
Advertisement
Dynacode series
0808
4
Electronics
DANGER!
Risk of death via electric shock!
Before opening the housing cover, disconnect the
device from the mains supply and wait approx. 2 - 3
minutes until the power supply unit has discharged.
4.1 Replacing primary fuse
Figure 4
The primary fuse is in line filter block that can be accessed from
outside.
1. Unplug the machine and then open its cover.
2. Remove the fuse-holder which is behind.
3. Replace the fuse (microfuse 2,0 AT).
Service instructions
Electronics
15
Advertisement
Table of Contents
Need help?
Do you have a question about the Dynacode Series and is the answer not in the manual?
Questions and answers