System Commands; Changing Phonesuite's Date And Time; Time; Date - PhoneSuite Console User Manual

Some commands affect system-wide functions or affect all of the extensions in PhoneSuite. These com-
mands include changing the system date and time, clearing the 9-1-1 Alarm after someone dials 911, set-
ting or clearing a Trunk Alarm, and setting all extensions to a checked-in status. In addition, the console
has the ability to access a particular trunk directly, usually to test that it is working or to clear it if it is
locked up. These commands are described in this section.

Changing PhoneSuite's Date and Time

The console operator can change the date and time that is displayed on the console and is used for system-
wide features such as wakeup calls. To set the time or date, press the * key on the console keypad. The dis-
play will read:

Time=1

Prog=B from Idle
Time
Press 1 to set the time, or 2 to set the date. If 1 (time) is pressed, the display will read:
SET TIME
Enter the time in 24-hour ("military") format, where 1:00 p.m. is entered as 13:00 and Midnight is 00:00.
You must press two digit keys for the hour and two digit keys for the minute. For example, 8:05 a.m. is
entered as 0-8-0-5. As the time is entered, each digit will be displayed in the hhmm portion of the display.
Once all four digits have been entered, the display will read:
SET TIME
Enter if OK D=Ex
Press the '#' key (Enter) if the new time is correct, or press D to exit without updating the PhoneSuite time.
The display will then return to the "Idle" display. The time may also be set with the A61 command.

Date

If setting the date, press * on the console keypad, and then press 2. The display will read:
SET DATE
Setting the date follows the same process as setting the time, except that the date must be entered as two
digits for the month, two digits for the day, and two digits for the year. The date may also be set with the
A62 command.
48

System Commands

Date=2
hhmm
hhmm
mmddyy
®
PhoneSuite Console User's Manual rev. 081106