Description of the Digital keypad
Status Display
Display the driver's current status
LED Display
Indicates frequency, voltage, current, user defined
units and etc.
Potentiometer
For master Frequency setting.
RUN Key
Start AC drive operation.
Operation steps of the Digital Keypad
Setting Mode
S TART
MO DE
NOTE: In the selection mode, press
Setting parameters
ENTER
NOTE: In the parameter setting mode, you can press
To shift data
START
Setting direction
MO DE
Italiano
MO DE
MO DE
ENTER
ENTER
(When operation source is digital keypad)
MO DE
MO DE
English
UP and DOWN Key
Set the parameter number and changes the
numerical data, such as Master Frequency.
MODE
Change between different display mode.
STOP/RESET
Stops AC drive operation and reset the drive after
fault occurred.
ENTER
Used to enter/modify programming parameters
MO DE
MO DE
GO STA R T
to set the parameters.
ENTER
or
Success to
set parameter.
ENTER
MO DE
ADV20 QS, V1.02
RUN
STOP
FWD
REV
Input data error
to return the selecting mode.
o r
MODE
E
9