gefran ADV20 series Quick Start-Up page 40

Terminal
Terminal Function
Symbol
+24V DC Voltage Source
DCM Digital Signal Common
Multi-function Relay output
RA
(N.O.) a
Multi-function Relay output
RB
(N.C.) b
RC Multi-function Relay common
+10V Potentiometer power supply
Analog voltage Input
+10V
AVI
AVI
ACM
Analog control signal
ACM
(common)
Analog output meter
ACM circuit
AFM
internal circuit
NOTE: Control signal wiring size: 18 AWG (0.75 mm
8 ADV20 QS, V1.02
+24VDC, 50mA used for PNP mode.
Common for digital inputs and used for NPN
mode.
Resistive Load:
5A(N.O.)/3A(N.C.) 240VAC
5A(N.O.)/3A(N.C.) 24VDC
Inductive Load:
1.5A(N.O.)/0.5A(N.C.) 240VAC
1.5A(N.O.)/0.5A(N.C.) 24VDC
Refer to Pr.03.00 for programming
+10VDC 3mA
AVI circuit Impedance:
Resolution:
Range:
Selection:
Set-up:
internal circuit
Common for AVI/ACI and AFM
0 to 10V, 2mA
AFM Impedance:
Output current
0~10V Resolution:
potentiometer
Range:
Max. 2mA
Function:
ACM
Factory Settings (NPN mode)
ON: Connect to DCM
47kΩ
10 bits
0 ~ 10VDC / 4 ~ 20mA =
0 ~ Max. Output Frequency
(Pr.01.00)
Pr.02.00, Pr.02.09, Pr.10.00
Pr.04.14 ~ Pr.04.17
47Ω
2mA max
8 bits
0 ~ 10VDC
Pr.03.03 to Pr.03.04
2
) with shielded wire.
Italiano English