Table of Contents
Advertisement
To copy or scan the following types of originals, use the document glass rather than the duplex
automatic document feeder.
•
Paper with paper clips or staples attached
•
Paper with wrinkles, curls, folds, tears, or notches
•
Coated or carbonless paper or items other than paper such as cloth or metal
•
Envelopes
•
Books
Document Feeder
Duplex Automatic Document Feeder Guidelines
When loading originals into the duplex automatic document feeder, follow these guidelines:
•
Insert originals face up with the top of the page entering the feeder first.
•
Only place loose sheets of paper in the duplex automatic document feeder.
•
Adjust the paper guides so that they fit against the originals.
•
Only Insert paper in the duplex automatic document feeder when ink on the paper is dry.
•
Do not load originals above the MAX fill line.
Copying an ID Card
You can copy both sides of an ID card or small document onto one side of paper. Each side is copied
using the same location on the document glass. The printer stores both sides and prints them side by
side on the paper.
To copy an ID card:
• Insert originals face up, with page one on top.
• The confirmation indicator illuminates when
you load the originals correctly.
• Adjust the paper guides so they fit against the
originals.
• The document feeder supports paper weights
of 50–125 g/m² for 1-sided pages, and
60–125 g/m² for 2-sided pages.
• The document feeder supports paper sizes
from 139.7 x 139.7 mm (5.5 x 5.5 in.) through
215.9 x 355.6 mm (8.5 x 14 in.).
• The maximum document feeder capacity is
approximately 60 sheets of 80 g/m² paper.
Xerox® WorkCentre® 3655 Multifunction Printer
Copying
83
User Guide
Advertisement
Table of Contents
Troubleshooting
