Selecting Reducing or Splitting
You can determine the method to use for handling images that are too large.
To select reducing or splitting:
Press the Services Home button, then touch Fax.
1.
2.
Touch the Layout Adjustment tab, then touch Reduce/Split.
3.
Touch an option:
Reduce to Fit shrinks large documents to fit on smaller paper.
−
−
Split Across Pages continues a single image across several pages.
Touch OK.
4.
Setting Up Book Faxing
You can determine the method used for scanning images in a book.
To select book faxing:
Press the Services Home button, then touch Fax.
1.
Touch the Layout Adjustment tab, then touch Book Faxing.
2.
3.
Touch an option:
Off is the default setting.
−
−
Both Pages scans both pages of the book.
Left Page Only scans the left page of the book.
−
−
Right Page Only scans the right page of the book.
4.
To set the amount to erase, touch the Binding Edge Erase arrows as needed.
Touch OK.
5.
Printing a Confirmation Report
You can print a report that confirms when your faxes are sent or received. The report contains
information on timeouts, busy signals, and retry failures.
To set up a confirmation report printing:
1.
Press the Services Home button, then touch Fax.
Touch the Fax Options tab, then touch Confirmation Report.
2.
3.
Touch an option:
Print Confirmation: This option generates a report for all fax jobs.
−
Print on Error Only: This option generates a report only for fax jobs that fail to send.
−
4.
Touch OK.
Selecting the Starting Rate
Select the highest starting rate unless the destination for the fax you are sending has special
requirements.
Xerox® WorkCentre® 3655 Multifunction Printer
Faxing
115
User Guide