Installation And Setup Overview - Xerox workcentre wc3655 User Manual

Installation and Setup

Installation and Setup Overview

Before printing, your computer and the printer must be plugged in, turned on, and connected. Configure
the initial settings of the printer, then install the driver software and utilities on your computer.
You can connect to your printer directly from your computer using USB, or connect over a network using
an Ethernet cable or wireless connection. Hardware and cabling requirements vary for the different
connection methods. Routers, network hubs, network switches, modems, Ethernet cables, and USB cables
are not included with your printer and must be purchased separately. Xerox recommends an Ethernet
connection because it is typically faster than a USB connection, and it provides access to CentreWare
Internet Services.
If the Software and Documentation disc is not available, you can download the latest drivers
Note:
from www.xerox.com/office/WC3655drivers.
See also:
Selecting a Location for the Printer
Choosing a Connection Method
Connecting the Printer
Configuring Network Settings
Installing the Software
30 Xerox® WorkCentre® 3655 Multifunction Printer
User Guide
on page 31
on page 32
on page 32
on page 36
on page 38