Xerox workcentre wc3655 User Manual page 51

3. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
4. Load the paper in the tray.
− Load hole punched paper with the holes to the right.
− For 1-sided and 2-sided printing, load letterhead or pre-printed face down with the top edge
going into the printer.
Xerox® WorkCentre® 3655 Multifunction Printer
Paper and Media
51
User Guide