4.6
Insulation Measurement - Connections
Figures 4-4 shows the connections to measure the insulation of
one conductor to the other conductors. The cable should be dis-
connected at both ends to avoid leakage through switchboards and
panels. For the Model 6503, the connection to the guard terminal
is used to eliminate the effects of surface leakage across exposed
insulation at one end of the cable. Refer to the section on Utilization
of the Guard Terminal (§ 4.5).
Conductor Under Test
Cable Insulation
Fus
6501
Conductor Under Test
Cable Insulation
G
6503
Figure 4-4
GlobalTestSupply
17
www.
.com
Quality AEMC Products Online at:
sales@GlobalTestSupply.com
Megohmmeter Models 6501/6503