Menu Card "Settings - DETEWE OPENPHONE 61 User Manual

Features and Menu Cards

Menu Card "Settings"

1 Volume
Then select
Loudspeaker or
Change the default volume with
the +/- key + or enter a digit
from 0 to 5. The value set is
then represented by a bar dis-
play.
2 Ringing Tone
Melody
1
Pitch
2
Select a setting and adjust it
with the +/- key + or enter a
digit from 0 to 9. The value set
is then represented by a bar dis-
play.
3 Basic Acoustic Settings
This menu item allows volumes
and ringing tone melodies to be
reset to the factory settings.
4 Block Dialling
This menu item can be used to
switch block dialling on or off.
When block dialling is activated
you can enter telephone num-
bers on-hook, correct them
where necessary and dial by
going off-hook, or pressing the
hands-free key or a call key.
When block dialling is deacti-
vated (direct dialling) each digit
entry leads to automatic line
seizure.
48
Main Menu
Ringing tone,
1 2
Handset.
3
5 Call Charges / Time
You can select between call
charge display on/off and time
(call time display).
6 Peripherals
If you have connected an
1
additions adapter and are using
additional devices connected to
it (e.g. headset or loudspeaker),
you must select here which
additional device has been con-
nected. This menu item can also
be used to set the volume on
the additional device.
If you have connected a V.24
2
adapter, you can use this menu
item to configure the V.24 inter-
face.
A range of terminal mode
3
applications is offered here,
whose functions and operation
can be found in the documenta-
tion for the corresponding
applications. Function keys
must always be programmed to
operate and use these applica-
tions.