Delete Standard Points - Thermo Scientific NanoDrop 1000 V3.7 User Manual

Delete Standard Points

The Delete Point button allows the user to delete points by first
selecting the data point to be deleted in the table and then choosing
the 'Delete Point' button. If erroneous or non-representative readings
are encountered for a specific standard, all replicates of that standard
are cleared by selecting 'Delete 1 Standard'. Additionally, all
standards can be deleted at once using the 'Reset all Standards'
button.
Section 13- Protein Pierce 660 nm
The 15:1 reagent to sample
ratio assay covers 500-2000
ug/ml.
13-5