Table of Contents
Advertisement
Test Type: Auto fills in module name.
Date: Auto fills in the date and time when a report is generated.
Selected Plot: There are two methods of selecting or highlighting
individual sample data. The user may simply move the cursor
over the plot of interest and click or use the 'Selected Plot' drop
down box (which will also display the legend). The selected
sample will show up as a bold plot line.
Plots/Sets: Users may select the maximum number of individual
plots (up to 20) graphed per page. Since a report can hold data
for many samples and a graph page is limited to 20 plots,
additional sample spectra are displayed on new pages. Each
page is then referred to as a set.
Legend: Positioning the cursor over the legend box will bring up
a visual display matching the sample name to a plot color. The
user is not able to select or highlight a sample from the legend.
Sample information: Automatically populates with data
associated with selected sample. Data displayed is appropriate
for data type chosen. Note: Information is based on data collected
at the time the sample was measured and is not modified by a
change in cursor position on the Data Viewer real time display.
Movable x and y axis: Available for all data types. If the cursor is
out of view in either direction- rescale the axis by typing over one
of the outer limit numbers. The cursor absorbance information
displayed at the bottom of the page is determined by the position
of the movable cursors. The movable X determines the baseline
from which the peak of the Y position is calculated. Reset
Baseline will reposition the x axis back to zero.
Reports
The Reports page displays the data for selected samples in a table
format. The user may modify column configurations for each method
type and save multiple customized formats.
Section 15- Archived Data and Data Viewer
15-6
Hide quick links:
Advertisement
Table of Contents
