YASKAWA CIMR-AC2B0004 Quick Start Manual page 17

Type No.
DM+ Safety monitor output
Safety Monitor
Output
Safety monitor output common
DM-
NOTICE: The terminals HC, H1, H2 are used for the Safe Disable function. Do not remove the wire link between HC, H1, or H2 unless
the Safe Disable function is used.
NOTICE: The wiring length to the terminals HC, H1 and H2 should not exceed 30 m.
YASKAWA ELECTRIC TOEP C710606 48A - AC Drive A1000 1000Hz Software - Quick Start Guide
Terminal Name (Function)
Refer to Safe Disable Input Function on page 37
Function (Signal Level) Default Setting
Outputs status of Safe Disable function. Closed when both Safe
Disable channels are closed. Up to +48 Vdc 50 mA
when using this function.
3 Electrical Installation
EN 17