Scan To The Home Folder - Oce ColorWave 500 Operation Manual

Scan to the home folder

Introduction
When you have enabled user authentication in Océ Express WebTools you can submit a print or
scan job to the home folder as a secure location.
NOTE
The Home folder is a personal and secure external location, you can only use when it is
configured by your IT department as part of your infrastructure.
Before you begin
Enable [User authentication] with [User name and password] configured and enable the home
folder as a location first. For more information, see
Procedure
1. Log in on the printer user panel using your credentials [User name and password].
2. Feed the original face up and centered on the original feeding table.
3. Select the scan tile.
4. Select a template with home folder as destination or change the destination to home folder.
5. Tap the green button to start the scan job.
After you finish
The file is delivered on your own personal location on the network. In a typical configuration you
can find the file on your workstation under the home drive.
Enable and edit the Home folder on page
Chapter 4 - Use the Printing System
Scan to the home folder
103.
249