Oce ColorWave 500 Operation Manual page 267

7. Use both hands to slide the media under the metal paper guide (2) until the media is transported
automatically.
8. Close the media drawer. The user panel displays the message that new media is detected.
NOTE
Do not open the media drawer during loading.
9. Follow the steps in the wizard to define the correct media.
Select the media type. The printer detects the correct size automatically. Choose whether you
want a short, long, or no strip, and tap [OK].
NOTE
For the highest output quality, it is advised to always perform a media calibration when
you load a new media type.
Result
You can now print on the newly loaded media.
2
Chapter 5 - Maintain the Printing System
Load a media roll
267