Oce ColorWave 500 Operation Manual page 131

[Folding method]
[With binding edge] (DIN-
A).
[Binding edge size]
[Reinforcement]
[Enabled]
[Disabled]
Description
Folded package, but the last fold
(rear) has additional width.
The previous fold could be shorter.
Defines how much the binding is
outside the package.
NOTE
Only visible when the se-
lection in [Folding method]
is set to [With binding
edge].
Description
Glues the pre-punched strips to the
rear of the folded package.
NOTE
• The reinforcement strip
uses a binding size of
12mm (A).
• The package width size
(B) excludes the [Bind-
ing edge size] (A). So the
back panel consists of
the package width size
plus the binding edge
size (A+B).
• Only possible when
[Folding method] is
[With same size back].
No glued strip.
Chapter 3 - Define your Workflow with Océ Express WebTools
Fold settings
Example
0 - 30 mm
Max 230 mm
0 - 30 mm
Max 230 mm
Example
193 - 198 mm
7.6 - 7.8 inch
131