Oce ColorWave 500 Operation Manual page 146

What is an input profile / standardization?
Input profile / standardization Description
CMYK - [ ISO Coated v2 (ECI) ] This setting indicates an offset press standard, used in Europe
CMYK - [ PSO Uncoated
ISO12647 (ECI) ]
CMYK - [ Uncoated FOG-
RA29 ]
CMYK - [ GRACoL2006 Coat-
ed1v2 ]
CMYK - [ SWOP2006 Coat-
ed3v2 ]
CMYK - [ SWOP2006 Coat-
ed5v2 ]
Gray[None (no profile used)]
Gray[ sGray ]
Gray[ Adobe Gray 20% ]
146 Chapter 3 - Define your Workflow with Océ Express WebTools
to print separations and proofs on coated media. Based upon
Fogra39 with 330% ink limit.
This setting indicates an offset press standard, used in Europe
to print separations and proofs on uncoated media. Based
upon Fogra47.
This setting indicates an offset press standard, used in Europe
to print separations and proofs on uncoated media. Based
upon Fogra29.
This setting indicates an offset press standard, frequently used
in the US to print separations and proofs on coated media
grade 1.
This setting indicates an offset press standard, used in the US
to print separations and proofs on coated media grade 3.
This setting indicates an offset press standard, used in the US
to print separations and proofs on coated media grade 5.
Use this setting to directly transform the grayscale info to black
toner usage only.
Use this setting to transform the grayscale info based upon the
sGray profile (lightness scale sRGB with gamma 2.2) to CMYK
toner usage.
Use this setting to transform the grayscale info based upon the
Adobe Gray 20% profile (Adobe specific dot gain 20%) to CMYK
toner usage.