Page 1 Océ cm6520 Printing for Professionals Quick Guide Copy/Fax/Scan/ Box Operations...
Page 2: Energy Star
"low-power ® mode" after a period of inactivity. An ENERGY STAR product uses energy more efficiently, saves you money on utility bills and helps protect the environment. cm6520...
Page 3: Trademarks And Registered Trademarks
RSA Security Inc. RSA BSAFE is a registered trademark or trademark of RSA Security Inc. in the United States and/or other countries. License information This product includes RSA BSAFE Cryptographic software from RSA Security Inc. cm6520...
Page 4: Table Of Contents
Useful printing operations Selecting the paper..........................3-2 Managing and limiting printing ......................3-4 Reducing paper use while printing....................... 3-6 Adjusting the print position........................3-7 Finishing documents ..........................3-8 Adding different paper........................... 3-9 Adding text and images when printing ....................3-11 cm6520...
Page 5 Printing/sending multiple data combined ....................6-9 Changing finishing settings for saved data before printing .............6-12 Performing box operations from a computer ..................6-15 Troubleshooting Troubleshooting .............................7-2 User Settings parameters Displaying the User Settings screen ....................8-2 Settings that can be specified.......................8-3 Glossary Glossary ..............................9-2 10 Index cm6520...
Page 6: Safety Information
Some products have a high-voltage part or a laser beam source inside that could cause an electrical shock or blindness. • Do not modify this product, as a fire, electrical shock, or breakdown could result. If the product employs a laser, the laser beam source could cause blindness. cm6520...
Page 7 Consult your authorized service representative before connecting other equipment on the same wall outlet. Overload could result in a fire. CAUTION • The outlet must be near the equipment and easily accessible. Otherwise you can not pull out the power plug when an emergency occurs. cm6520...
Page 8 Do not let any object plug the ventilation holes of this product. Heat could accu- mulate inside the product, resulting in a fire or malfunction. • Do not use flammable sprays, liquids, or gases near this product, as a fire could result. cm6520...
Page 9 Guide or other documents. If the unit falls it may cause severe personal injury. The product may also be damaged or malfunction. When the optional Fax Kit CM3500210 is not installed: Before successive holidays CAUTION • Unplug the product when you will not use the product for long periods of time. cm6520...
Page 10: Regulation Notices
This product employs a Class 3B laser diode that emits an invisible laser beam. The laser diode and the scanning polygon mirror are incorporated in the print head unit. The print head unit is NOT A FIELD SERVICE ITEM: Therefore, the print head unit should not be opened under any circumstances. cm6520...
Page 11 Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funk-tion. Undgå udsættelse for stråling. Klasse 1 laser produkt der opfylder IEC60825 sikkerheds kravene. Dansk: Dette er en halvlederlaser. Laserdiodens højeste styrke er 30 mW og bølgelængden er 775-800 nm. For Finland, Sweden users LOUKAN 1 LASERLAITE KLASS 1 LASER APPARAT x-10 cm6520...
Page 12 Dersom apparatet brukes på annen måte enn spesifisert i denne bruksan-visning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser klass 1. Dette en halvleder laser. Maksimal effekt till laserdiode er 30 mW og bølge-lengde er 775-800 nm. cm6520 x-11...
Page 13 Notification for California Customers This product uses a CR Lithium Battery which contains perchlorate material. This perchlorate warning applies to perchlorate-containing lithium batteries sold or distributed in California, USA. "Perchlorate Material - Special handling may apply, See www.dtsc.ca.gov/ hazardouswaste/perchlorate." x-12 cm6520...
Page 14 For EU member states only This product complies with RoHS (2002/95/EC) Directive. This device is not intended for use at a video workstation in compliance with BildscharbV. Das Gerat ist nicht fur die Benutzung am Bildschirmarbeitsplatz gemas BildscharbV vorgesehen. cm6520 x-13...
Page 15: Caution Notations And Labels
Caution notations and labels Safety precaution notations and labels appear on this machine at the following positions. Be very careful that an accident does not occur when operations such as removing paper misfeeds are performed. x-14 cm6520...
Page 16: Space Requirements
806.5 958.3 391.9 1130 (31-3/4) (37-3/4) (15-1/4) (15-7/16) (44-1/2) (1-15/16) cm6520+9834+9838+9835 Unit: mm (inch) Reminder Be sure to allow a clearance of 100 mm (4 in.) or more at the back of this machine for the ventilation duct. cm6520 x-15...
Page 17: Operation Precautions
Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies. Color copies have a thicker layer of toner than normal black-and-white copies. Therefore, when a color copy is folded, the toner at the fold may peel off. x-16 cm6520...
Page 18: Introduction To The User's Guides
Refer to this User’s Guide for details on operating procedures for using the printer functions. User’s Guide [Box Operations] This User’s Guide contains descriptions of Box mode operations using the hard disk. Refer to this User’s Guide for details on saving, retrieving and moving Box documents. cm6520 x-17...
Page 19 This manual contains details of the fax driver functions that can be used to send a fax directly from a computer. Refer to this manual for operating procedures on using the PC-FAX functions. Note Adobe Reader is required in order to view these User’s Guides. x-18 cm6520...
Page 20: Available Features
Available features The cm6520 is a digital color multifunctional peripheral that eases the workflow and satisfies any application or office environment. In addition to the copy, fax, scanning and printing functions essential to any business, this machine provides network and box functions to support efficient document management.
Page 21 When printing from the computer, various settings can be specified, for example, the paper size, image quality, color tone and layout. Using a secure printing function, printing of important documents can be protected with a password.The printer driver can easily be installed from the enclosed CD-ROM. x-20 cm6520...
Page 22: Control Panel
[Interrupt] key again. [Stop] key Pressing the [Stop] key during an operation temporarily stops the op- eration. [Proof Copy] key Before printing a large number of copies, a single proof copy can first be printed in order to be checked. cm6520 x-21...
Page 23 Press to enter Copy mode. (As a default, the machine is in Copy mode.) While the machine is in Copy mode, the indicator on the key lights up in green. Note For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations]. x-22 cm6520...
Page 24: Turning The Machine On/Off
This switch turns on/off all functions of the machine. Normally, the main power switch is turned on. [Power] (auxiliary power) key Press to turn on/off machine operations. When turned off, the machine enters a state where it conserves energy. Turning on the machine Turning off the machine cm6520 x-23...
Page 25 Do not turn off the machine while it is operating, otherwise data being scanned or transmitted or queued jobs may be deleted. Note For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations]. x-24 cm6520...
Page 26: Loading Paper
Follow the procedure described below to load paper into the various paper trays. Loading paper into tray 1 and tray 2 Follow the procedure described below to load paper into tray 1 and tray 2. Slide the lateral guides to fit the size of paper to be loaded. cm6520 x-25...
Page 27 Note For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations]. Loading paper into tray 3 and tray 4 Follow the procedure described below to load paper into tray 3 and tray 4. x-26 cm6520...
Page 28 For details on the number of sheets of thick paper that can be loaded, refer to chapter 6, "Copy paper/original documents", of the User’s Guide [Copy Operations]. Note For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations]. cm6520 x-27...
Page 29 Up to 3,000 sheets of plain paper can be loaded. For details on the number of sheets of thick paper that can be loaded, refer to chapter 6, "Copy paper/original documents", of the User’s Guide [Copy Operations]. Note For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations]. x-28 cm6520...
Page 30 Do not load so many pages that the top of the stack is higher than the , mark. – Up to 150 sheets plain paper can be loaded. – Slide the lateral guides to fit the size of paper to be loaded. From the touch panel, select the paper type. cm6520 x-29...
Page 31 There are five Foolscap sizes: 220 × 330 mm w, 8-1/2 × 13 w, 8-1/4 × 13 w, 8-1/8 × 13-1/4 w and 8 × 13 w. Any one of these sizes can be selected. For details, contact your service representative. Note For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations]. x-30 cm6520...
Page 32: Clearing Paper Misfeeds
For details on misfeed 19 (post inserter 9835), refer to page x-35 of this manual and perform the appropriate operation. Note For details on the procedures for clearing paper misfeeds, refer to chapter 4, "Troubleshooting", of the User’s Guide [Copy Operations]. cm6520 x-31...
Page 33 Be careful not to spill toner inside the machine or get toner on your clothes or hands. If your hands become soiled with toner, immediately wash them with soap and water. If toner gets in your eyes, immediately flush them with water, and then seek professional medical attention. x-32 cm6520...
Page 34 Do not forcefully push or pull the sensor pin in the horizontal transport unit, otherwise the horizontal transport unit may be damaged. When moving the stacker unit, do not grab any part other than handle, otherwise your hand or fingers may be pinched. cm6520 x-33...
Page 35 Do not forcefully push or pull the sensor pin in the horizontal transport unit, otherwise the horizontal transport unit may be damaged. When moving the stacker unit, do not grab any part other than handle, otherwise your hand or fingers may be pinched. x-34 cm6520...
Page 36 The following procedure describes how to clear paper misfeeds that have occurred in post inserter 9835. Upper unit release lever Upper unit Reminder Be careful that your fingers are not pinched when returning the upper unit of the post inserter to its original position. cm6520 x-35...
Page 37: Replacing Consumables
Punch scrap box Toner cartridges Staple cartridge Waste toner box Imaging units Note For details, refer to chapter 8, "Replacing toner cartridges and staples and emptying punch scrap box" of the User’s Guide [Copy Operations]. x-36 cm6520...
Page 38 For details on the replacement procedure, refer to page x-40 of this manual. When it is time to replace an imaging unit, the following message appears (If it is replaceable by the user). Detail For details on the replacement procedure, refer to page x-41 of this manual. cm6520 x-37...
Page 39 For details on the replacement procedure for finisher 9833, refer to page x-44 of this manual. When the punch scrap box is full, the following message appears (If it can be emptied by the user). Detail For details on the emptying procedure, refer to page x-45 of this manual. x-38 cm6520...
Page 40 Be careful not to spill toner inside the machine or get toner on your clothes or hands. If your hands become soiled with toner, immediately wash them with soap and water. If toner gets in your eyes, immediately flush them with water, and then seek professional medical attention. cm6520 x-39...
Page 41 Be careful not to spill toner inside the machine or get toner on your clothes or hands. If your hands become soiled with toner, immediately wash them with soap and water. If toner gets in your eyes, immediately flush them with water, and then seek professional medical attention. x-40 cm6520...
Page 42 When replacing an imaging unit other than the black one, tilt the new imaging unit to the left and lightly shake it twice in the direction of the tilt, and then tilt the unit to the right and lightly shake it twice in the direction of the tilt. Dispose of used imaging units properly. Recycle where possible. cm6520 x-41...
Page 43 If toner gets in your eyes, immediately flush them with water, and then seek professional medical attention. Detail When replacing the black imaging unit, be sure to replace the filter at the back of the machine. Filter is included with the black imaging unit. x-42 cm6520...
Page 44 Replacing the staple cartridge (finisher 9834) The following procedure describes how to replace the staple cartridge for finisher 9834. Stacker unit Reminder When moving the stacker unit, do not grab any part other than handle, otherwise your hand or fingers may be pinched. cm6520 x-43...
Page 45 Replacing the staple cartridge (finisher 9833) The following procedure describes how to replace the staple cartridge for finisher 9833. Stacker unit Reminder When moving the stacker unit, do not grab any part other than handle, otherwise your hand or fingers may be pinched. x-44 cm6520...
Page 46 Emptying the punch scrap box The following procedure describes how to empty the punch scrap box. cm6520 x-45...
Page 47: Options
"Group" setting (separating by page), Staple settings ("Cor- ner" and "2 Positions"), "Half-Fold", "Center Staple & Fold", and "Tri- fold" are available. Punch kit CM5520010 Installed onto the finisher to allow hole punching to be used. x-46 cm6520...
Page 48 (IC card type) and the JScribe IC card reader/writer. Parts marked with an asterisk (*) are internal options and therefore are not shown in the illustration. Note For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations]. cm6520 x-47...
Page 49 cm6520...
Page 50: Basic Operations
Basic operations...
Page 51: Basic Copy Operation
If a screen for entering the user name/account name and password appears, type in the necessary information, and then touch [Login] or press the [Access] key. For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations]. cm6520...
Page 52 For details, refer to chapter 2, "Basic copy operations", of the User’s Guide [Copy Operations]. Type in the desired number of copies. – To change the number of copies, press the [C] (clear) key, and then type in the desired number. cm6520...
Page 53 To scan the next document while printing (reserve a copy job), position the next document, and then press the [Start] key. – For details on stopping printing or interrupting copying, refer to chapter 2, "Basic copy operations", of the User’s Guide [Copy Operations]. cm6520...
Page 54: Basic Print Operation
Send print data from an application on the computer through the printer driver to this machine. The following printer drivers can be used with this machine. Windows: Océ PCL driver Océ PostScript driver Macintosh: OS X PostScript PPD driver OS 9 PostScript PPD driver cm6520...
Page 55 Network settings can also be specified by using Web Connection. For details, refer to chapter 3, "Setting up network printing", of the User's Guide [Print Operations]. Printing Create a document in the application, and then select the print command. In the Print dialog box, select the printer. cm6520...
Page 56 Basic operations – If necessary, display the printer driver settings dialog box, and then specify the printing settings, such as stapling. cm6520...
Page 57 If "Secure Print", "Save in User Box" or "Proof Print" was selected from the "Output Method" down- down list in the printer driver, the document is saved in a user box or in the memory of this machine. Print the document by using the control panel of the machine. cm6520...
Page 58: Basic Fax Operation
If a screen for entering the user name/account name and password appears, type in the necessary information, and then touch [Login] or press the [Access] key.For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations]. cm6520...
Page 59 For details, refer to chapter 2, "To send a fax", of the User’s Guide [Fax Operations]. Position the document to be faxed. – To send a document that cannot be loaded into the ADF (a thick document or a document on thin paper), position it on the original glass. 1-10 cm6520...
Page 60 To stop the transmission after the [Start] key was pressed, touch [Job List], then [Job Details], and then delete the job to be stopped. For details, refer to chapter 2, "To send a fax", of the User’s Guide [Fax Operations]. cm6520 1-11...
Page 61 Basic operations 1-12 cm6520...
Page 62: Basic Scan Operation
Scan to SMB: The scan data is sent to a shared folder on a computer on the network. Other than data scanned with this machine, data saved in a user box can also be sent. Change the mode. cm6520 1-13...
Page 63 [Login] or press the [Access] key. For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations]. Select the destination. – If destinations are already registered, a registered destination can be selected. For details on registering destinations, refer to page 5-2 of this manual. 1-14 cm6520...
Page 64 For easier operation, specify in advance any settings other than the network settings according to the desired application. For details, refer to chapter 1, "Before using scanning functions", of the User’s Guide [Network Scanner Operations] and chapter 3, "Administrator Mode", of the User’s Guide [Web Connection Operations]. cm6520 1-15...
Page 65: Basic Box Operation (Registering User Boxes)
This user box is used when adding an image of the date/time or annotation number to a document data saved in Scan function. This user box is registered in Administrator mode. For details, refer to chapter 7, "Specifying utility mode parameters", of the User’s Guide [Box Operations]. 1-16 cm6520...
Page 66 Basic operations Display the screen for registering user boxes. cm6520 1-17...
Page 67 Basic operations Touch [New]. 1-18 cm6520...
Page 68 To change the settings for a registered user box, select the user box whose settings are to be changed, and then touch [Edit]. – To delete a registered user box, select the user box to be deleted, and then touch [Delete]. cm6520 1-19...
Page 69 Confidential RX: Specify whether or not confidential faxes can be received. When a confidential fax is received, a password is also specified. – When registering a user box, settings must be specified for the user box number and the user box name. Be sure to specify these settings. 1-20 cm6520...
Page 70 We recommend saving data to be shared within a group in group user boxes. cm6520 1-21...
Page 71: Basic Box Operation (Saving Data In A User Box)
Data saved from Copy mode cannot be transmitted. The operations for saving data in user boxes differ depending on how the data is to be used. Saving data in a user box with a Copy mode operation Touch [Save in User Box]. 1-22 cm6520...
Page 72 Check the name of the document. – The document name automatically set as the default is displayed. – To change the document name, touch [Document Name], and then use the keyboard that appears in the touch panel to type in the name. cm6520 1-23...
Page 73 Position the document to be saved. Press the [Start] key. – When saving a document to a user box with a Copy mode function, select "Page Print" to "Yes" to print the document at the same time that it is saved. 1-24 cm6520...
Page 74 Basic operations Saving data in a user box with a Fax/Scan mode operation Touch [User Box]. cm6520 1-25...
Page 75 Check the name of the document. – The document name automatically set as the default is displayed. – To change the document name, touch [Document Name], and then use the keyboard that appears in the touch panel to type in the name. 1-26 cm6520...
Page 76 Data can also be saved in a user box by specifying a user box destination as the recipient of the fax or scan data. For details, refer to chapter 3, "Specifying utility mode parameters", of the User’s Guide [Network Scanner Operations]. cm6520 1-27...
Page 77 Select the user box where the document is to be saved. – The user box can also be specified by touching [Enter User Box No.], then typing in the box number. – To search for a user box name, touch [Search User Box]. 1-28 cm6520...
Page 78 To specify settings such as the image quality and document orientation, touch [Scan Settings] or [Original Settings]. For details, refer to chapter 2, "Saving documents", of the User’s Guide [Box Operations]. Position the document to be saved. Press the [Start] key. cm6520 1-29...
Page 79 Basic operations – The operation can also be started by touching [Start]. 1-30 cm6520...
Page 80: Basic Box Operation (Using Saved Documents)
Data can more easily be imported from a user box to the computer. For details, refer to page 6-15 of this manual. Also refer to chapter 2, "User Mode", of the User’s Guide [Web Connection Operations]. cm6520 1-31...
Page 81 Basic operations Printing saved documents Select the user box containing the document to be printed. 1-32 cm6520...
Page 82 To print multiple saved data at the same time, touch [Combine]. Up to 10 documents can be printed at the same time. For details, refer to chapter 4, "Printing a user box document", of the User’s Guide [Box Operations]. cm6520 1-33...
Page 83 Basic operations Press the [Start] key. – The operation can also be started by touching [Start]. 1-34 cm6520...
Page 84 Basic operations Sending saved documents Select the user box containing the document to be sent. cm6520 1-35...
Page 85 For details, refer to chapter 5, "Sending a user box document", of the User’s Guide [Box Operations]. Select the destination. – If destinations are already registered, a registered destination can be selected. For details on registering destinations, refer to page 5-2 of this manual. 1-36 cm6520...
Page 86 If necessary, touch [Communication Settings], and specify the desired settings. For details, refer to chapter 5, "Sending a user box document", of the User’s Guide [Box Operations]. Press the [Start] key. – The operation can also be started by touching [Start]. cm6520 1-37...
Page 87 Basic operations 1-38 cm6520...
Page 88: Useful Copy Operations
Useful copy operations...
Page 89: Specifying Basic Settings For Quick Copying
The screen can be customized, for example, with the Quick Copy screen, so that copy functions are more conveniently available. Quick Copy screen Basic copy settings are available in one screen. Touch [←] in the screen to display additional settings, such as other Color settings. cm6520...
Page 90 Original Setting tab Press to display the Original Setting screen. Quality/Density tab Press to display the Quality/Density screen. Application tab Press to display the Application screen. Note For details, refer to chapter 11, "Utility mode", of the User's Guide [Copy Operations]. cm6520...
Page 91: Reducing Paper Use While Copying
Double-sided copying When printing a large number of single-sided documents, print on both sides of the paper use by half. Note For details, refer to chapter 2, "Basic copy operations", of the User’s Guide [Copy Operations]. cm6520...
Page 92 Useful copy operations Combined copies Select "2in1", "4in1" or "8in1", depending on the number of pages that can be printed on a single page. Combine these settings with double-sided copying to further reduce paper use. cm6520...
Page 93 Useful copy operations If “4in1” or “8in1” is selected, the page arrangement can be selected. Note For details, refer to chapter 2, "Basic copy operations", of the User’s Guide [Copy Operations]. cm6520...
Page 94: Copying A Large Number Of Document Pages At One Time
After all document pages are scanned, the copies can be outputted together. This is useful for printing multiple copies of a document containing a large number of pages. Separate Scan Repeat this operation until all document pages have been scanned. cm6520...
Page 95 To copy documents that cannot be loaded into the ADF, position them on the original glass. Documents can also be scanned in separate batches from the original glass. To change the settings, touch [Change Setting]. Note For details, refer to chapter 2, "Basic copy operations", of the User’s Guide [Copy Operations]. cm6520...
Page 96: Producing A Booklet From Copies
"Booklet Original" function is used depends on the layout of the original document. Booklet For a document containing individual pages, select the "Booklet" function. The page order of the scanned document is automatically arranged and double-sided copies are printed. cm6520...
Page 97 For details, refer to chapter 7, "Application functions", of the User’s Guide [Copy Operations]. Booklet Original For a pamphlet with its staples removed from the center binding, select the "Booklet Original" function. The document will be copied and bound at the center to create copies like the original pamphlet. 2-10 cm6520...
Page 98 Useful copy operations Note For details, refer to chapter 7, "Application functions", of the User’s Guide [Copy Operations]. cm6520 2-11...
Page 99: Erasing Document Shadows From Copies
Useful copy operations Erasing document shadows from copies Frame Erase Copies can be produced by erasing unwanted areas around the document, such as the transmission information on received faxes and the shadows of punched holes. 2-12 cm6520...
Page 100 The same width can be erased on all four sides of the document, or the width that is erased can be specified for each side. The width of the frame to be erased can be set between 0.1 and 50 mm. Note For details, refer to chapter 7, "Application functions", of the User’s Guide [Copy Operations]. cm6520 2-13...
Page 101: Printing Copies Enlarged/Reduced On Paper With A Different Size
Useful copy operations Printing copies enlarged/reduced on paper with a different size Auto zoom Copies can be produced with the zoom ratio automatically selected based on the size of the loaded document and the specified paper size. 2-14 cm6520...
Page 102 Select the paper tray loaded with the desired paper size. Reminder When copying onto paper larger than the document, load the document with the same orientation as the paper. Note For details, refer to chapter 2, "Basic copy operations", of the User’s Guide [Copy Operations]. cm6520 2-15...
Page 103: Copying Book Page Spreads On Separate Sheets Of Paper
Useful copy operations Copying book page spreads on separate sheets of paper Book Copy A page spread, such as in an open book or pamphlet, can be copied onto separate pages. 2-16 cm6520...
Page 104 Useful copy operations Detail The following Book Scanning settings are available. Settings can be specified for copying the front and back covers of a book. cm6520 2-17...
Page 105 The front cover, separate copies of each page in the page spreads and the back cover are printed in the document page order. Note For details, refer to chapter 7, "Application functions", of the User’s Guide [Copy Operations]. 2-18 cm6520...
Page 106: Adding Cover Pages While Copying
When copying using paper for cover pages that is different from the paper of the main body of the document, instead of copying the cover pages and document separately, the entire document can be printed at the same time using the different types of paper. cm6520 2-19...
Page 107 Select the paper tray loaded with the paper to be used for the cover pages. Reminder Use paper with the same size for the cover pages and for the main body of the document, and load them in the paper trays in the same orientation. 2-20 cm6520...
Page 108 Useful copy operations Note For details, refer to chapter 7, "Application functions", of the User’s Guide [Copy Operations]. cm6520 2-21...
Page 109: Binding With Staples And Punching Holes In Copies
The Staple settings are available only if the optional finisher is installed. Holes for filing can be punched in the copies. The Punch settings are available only if the optional punch kit and finisher are installed. Punch [2-Hole] Staple [Corner] Staple [2-Position] 2-22 cm6520...
Page 110 There are five Foolscap sizes: 220 × 330 mm w, 8-1/2 × 13 w, 8-1/4 × 13 w, 8-1/8 × 13-1/4 w and 8 × 13 w. Any one of these sizes can be selected. For details, contact your service representative. Note For details, refer to chapter 2, "Basic copy operations", of the User’s Guide [Copy Operations]. cm6520 2-23...
Page 111: Copying Onto Envelopes
Use the bypass tray when copying onto envelopes. When copying onto envelopes, the orientation of the document and paper is extremely important. Position the document and the paper. Document Paper – Load with the side to be printed on facing down. 2-24 cm6520...
Page 112 If envelopes are loaded, select the "Envelope" Paper Type setting. Select a size that matches the size of the envelope that is loaded. Note For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations]. cm6520 2-25...
Page 113: Easily Recalling Frequently Used Functions
2.11 Easily recalling frequently used functions Registering/recalling programs Frequently used functions can be registered as a copy program. The registered copy program can easily be recalled and used. Registering a program First, specify the functions to be registered. 2-26 cm6520...
Page 114 Useful copy operations Detail A maximum of 30 copy programs can be registered. Recalling a program cm6520 2-27...
Page 115 For details, refer to chapter 3, "Additional copy operations", of the User’s Guide [Copy Operations]. Shortcut keys Frequently used Application functions can be added as a shortcut key to the Basic screen. Up to two shortcut keys can be created. 2-28 cm6520...
Page 116 Useful copy operations cm6520 2-29...
Page 117 The shortcut key is created. Detail If the image controller icon appears, only one shortcut key for the Basic screen can be programmed. Note For details, refer to chapter 11, "Utility mode", of the User’s Guide [Copy Operations]. 2-30 cm6520...
Page 118: Checking The Copies
Before printing a large number of copies, a single proof copy can first be printed so that it can be checked. This allows copy errors to be corrected before a large number of copies are printed. Select the desired copy settings. cm6520 2-31...
Page 119 Useful copy operations A single copy is printed. Check the proof copy. 2-32 cm6520...
Page 120 If the document was loaded into the ADF, printing of the proof copy begins without the sereen appearing confirming that scanning of the document is finished. Note For details, refer to chapter 3, "Additional copy operations", of the User’s Guide [Copy Operations]. cm6520 2-33...
Page 121: Checking The Number Of Prints
Useful copy operations 2.13 Checking the number of prints Meter Count The total number of printed pages and detailed counts of prints, such as the number of black-and-white prints, can be checked for various functions. 2-34 cm6520...
Page 122 Color" setting, the "Single Color" setting, the "2 Color" setting, and the total for all Color settings. Detail To print the list, touch [Print List]. To view the amount of toner that was used, touch [Coverage Rate]. Note For details, refer to chapter 9, "Care of the machine", of the User’s Guide "Copy Operations". cm6520 2-35...
Page 123: Reducing Electricity Usage
The limitations of the weekly timer can temporarily be canceled so the machine can be used. In order to cancel the limitations, the operating hours must first be entered. A password for non-business hours must be specified in Administrator mode. 2-36 cm6520...
Page 124 Useful copy operations Note For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations]. cm6520 2-37...
Page 125 Useful copy operations 2-38 cm6520...
Page 126: Useful Printing Operations
Useful printing operations...
Page 127: Selecting The Paper
Paper size Windows PCL/PS drivers: Basic tab Macintosh OS X driver: Page Attributes Note For details, refer to chapter 4, "Various printing methods", of the User’s Guide [Print Operations]. Zoom Specify the enlargement or reduction ratio. Original Reduce Enlarge cm6520...
Page 128 Windows PCL/PS drivers: Basic tab Macintosh OS X driver: Output Method Detail The "Offset" function is available only with finishers that allow pages to be shifted. Note For details, refer to chapter 4, "Various printing methods", of the User’s Guide [Print Operations]. cm6520...
Page 129: Managing And Limiting Printing
Since the saved data can be printed when it is needed, this feature is useful for organizing documents in public or private user boxes, depending on the document contents. Windows PCL/PS drivers: Basic tab Macintosh OS X driver: Output Method Note For details, refer to chapter 9, "Various settings", of the User’s Guide [Print Operations]. cm6520...
Page 130 User ID or account name Windows PCL/PS drivers: Basic tab Macintosh OS X driver: Output Method Note For details, refer to chapter 9, "Various settings", of the User’s Guide [Print Operations]. cm6520...
Page 131: Reducing Paper Use While Printing
The "Skip Blank Pages" function, which does not print blank pages, is also useful for reducing paper use. Note For details, refer to chapter 4, "Various printing methods", of the User’s Guide [Print Operations]. cm6520...
Page 132: Adjusting The Print Position
Right shift shift Top shift Left shift Right shift Bottom Bottom shift shift Windows PCL/PS drivers: Layout tab Macintosh OS X driver: Layout/Finish Note For details, refer to chapter 4, "Various printing methods", of the User’s Guide [Print Operations]. cm6520...
Page 133: Finishing Documents
Macintosh OS X driver: Layout/Finish Detail The center stapling and folding setting is available only if the optional finisher 9834 has been installed. Note For details, refer to chapter 4, "Various printing methods", of the User’s Guide [Print Operations]. cm6520...
Page 134: Adding Different Paper
Interleaves can be fed out between OHP transparencies when they are printed on. Windows PCL/PS drivers: Cover Mode tab Macintosh OS X driver: Cover Mode/Transparency Interleave Note For details, refer to chapter 4, "Various printing methods", of the User’s Guide [Print Operations]. cm6520...
Page 135 Pages 4 through 6: Printed double-sided with paper from Tray 1 Windows PCL/PS drivers: Cover Mode tab Macintosh OS X driver: Per Page Setting Note For details, refer to chapter 4, "Various printing methods", of the User’s Guide [Print Operations]. 3-10 cm6520...
Page 136: Adding Text And Images When Printing
Printed Copied Windows PCL/PS drivers: Stamp/Composition tab Macintosh OS X driver: Stamp/Composition Note For details, refer to chapter 4, "Various printing methods", of the User’s Guide [Print Operations]. cm6520 3-11...
Page 137 Windows PCL/PS drivers: Stamp/Composition tab Macintosh OS X driver: Stamp/Composition Detail In order to use headers/footers, the header/footer must first be registered with the machine. Note For details, refer to chapter 4, "Various printing methods", of the User’s Guide [Print Operations]. 3-12 cm6520...
Page 138: Adjusting The Image Quality
For details, refer to chapter 4, "Various printing methods", of the User's Guide [Print Operations]. Glossy Mode The document can be printed with a glossy finish. Windows PCL/PS drivers: Quality tab Macintosh OS X driver: Quality Note For details, refer to chapter 4, "Various printing methods", of the User's Guide [Print Operations]. cm6520 3-13...
Page 139: Using Printer Fonts
When printer fonts are used, the printing time is reduced, but there may be a difference between the displayed document and the print result. Note For details, refer to chapter 4, "Various printing methods", of the User's Guide [Print Operations]. 3-14 cm6520...
Page 140: Useful Fax Operations
Useful fax operations...
Page 141: Registering Frequently Used Fax Numbers
Destinations can be registered in the address book or as group destinations. Address book destinations By registering a frequently used destination in the address book, the destination can be recalled simply with the press of an address book button. Opening the destination registration screen cm6520...
Page 142 Useful fax operations Destination registration screen Registering a fax number cm6520...
Page 143 By selecting index characters appropriate for the registered name, the fax number can easily be found. Address: Using the keypad, type in the fax number to be registered. Note For details, refer to chapter 9, "Registering/Specifying Settings", of the User’s Guide [Fax Operations]. cm6520...
Page 144 The fax numbers that can be registered as a group destination must be registered in the address book. In order to register a group destination, the individual fax numbers must first have been registered in the address book. In the Create One-Touch Destination screen, touch [Group]. cm6520...
Page 145 Useful fax operations Note For details, refer to chapter 9, "Registering/Specifying Settings", of the User’s Guide [Fax Operations]. cm6520...
Page 146: Checking Fax Operations Performed Until Now
Communication List A log of the transmissions and receptions can be viewed in a report and printed. The transmission report, reception report and activity report, which combines the transmission and reception reports, are available in the Communication List screen. cm6520...
Page 147 Fax Retransmit User Box can be sent manually. Settings must be specified in Administrator mode in order to automatically save jobs in the Fax Retransmit User Box. For details, refer to chapter 2, "To send a fax", of the User’s Guide [Fax Operations]. cm6520...
Page 148: Transmitting To Multiple Recipients At The Same Time
Recipients can be specified for broadcast transmissions by typing in the destination using the keypad or by selecting a registered destination. In addition, recipients can be specified using a combination of the two methods. Entering a destination with the keypad cm6520...
Page 149 A destination can also be entered from the control panel. A destination can also be specified by entering its registration number. Note For details, refer to chapter 2, "To send a fax", of the User’s Guide [Fax Operations]. 4-10 cm6520...
Page 150 Destinations can be specified in the following combination. Address book: 500 destinations Direct input: 100 destinations Direct input e-mail addresses:5 destinations Note For details, refer to chapter 2, "To send a fax", of the User’s Guide [Fax Operations]. cm6520 4-11...
Page 151: Selecting Registered Transmission Source Information
Useful fax operations Selecting registered transmission source information Fax transmission source information settings Registered transmission source information (transmission source name and fax ID) can be selected and changed. From : User01 From : Group03 4-12 cm6520...
Page 152 The administrator can set the position for printing the transmission source information on the outside or inside of the document or it can be set to not be printed. Note For details, refer to chapter 6, "Useful transmission functions", of the User’s Guide [Fax Operations]. cm6520 4-13...
Page 153: Scanning The Documents To Be Sent
Select this setting to send altogether a document scanned in separate batches. Erase The shadows that appear when a document is scanned can be erased. Book Scan Specify the appropriate setting for scanning a book. Document Name This parameter is not available when sending to a fax number. 4-14 cm6520...
Page 154 In order to use the TX Stamp function, optional stamp unit must be in- stalled. Note For details, refer to chapter 2, "To send a fax", of the User’s Guide [Fax Operations]. cm6520 4-15...
Page 155: Sending Documents With A Command From The Recipient
"polling transmission". A document sent using this machine’s "Polling TX" function is stored in this machine’s Polling Transmission User Box and is sent when a request is received from the recipient. Sender Receiver Request for data to be sent 4-16 cm6520...
Page 156 Settings screen, and then specify the sender to receive the data. Bulletin polling transmission can be used if the recipient’s fax machine supports F-code functions. Note For details, refer to chapter 8, "Polling", of the User’s Guide [Fax Operations]. cm6520 4-17...
Page 157: Reducing Communication Costs
The scanned document is sent at the specified time. Detail In order to send the fax late at night, timer transmission must be specified when the document is sent. Note For details, refer to chapter 2, "To send a fax", of the User’s Guide [Fax Operations]. 4-18 cm6520...
Page 158: Reducing Communication Costs (Using The Internet)
With IP address faxing, color documents can be sent and received. Before IP address faxing can be used, various settings must be specified by the administrator. Detail For details, refer to chapter 2, "Transmission", of the User’s Guide [Network Fax Operations]. cm6520 4-19...
Page 159: Sending Documents By E-Mail
Useful fax operations Sending documents by e-mail Internet faxing Using the Internet, a scanned document can be sent as an e-mail attachment. The transmission costs are included in the Internet charges. When the destination is registered 4-20 cm6520...
Page 160 Useful fax operations When the destination is entered directly Note For details, refer to chapter 2, "Transmission", of the User’s Guide [Network Fax Operations]. cm6520 4-21...
Page 161: Reducing Printing Costs
Memory RX User Box Received faxes can be saved in user box as data and printed when they are needed. By selecting the received faxes to be printed, printing costs can be reduced. Printing data in the Memory RX User Box 4-22 cm6520...
Page 162 A password can be specified for the Memory RX User Box Settings for the Memory RX User Box are specified in Administrator mode. The administrator password is required to specify the settings. Note For details, refer to chapter 7, "Useful reception functions", of the User’s Guide [Fax Operations]. cm6520 4-23...
Page 163: Sending Confidential Documents
Sending confidential documents When sending documents, a confidential user box (SUB address) and the transmission password (transmission ID) can be specified in addition to the fax number of the destination to preserve the confidentiality of the document. F-Code transmission 4-24 cm6520...
Page 164 In order perform an F-code transmission, a confidential box and transmission ID must be specified on the recipient’s fax machine. An F-code transmission can be used only if the recipient’s fax machine supports F-code functions. Note For details, refer to chapter 6, "Useful transmission functions", of the User’s Guide [Fax Operations]. cm6520 4-25...
Page 165: Forwarding Received Data
If fax forwarding is specified, Memory RX Setting, PC-FAX RX setting and TSI User Box Setting cannot be used. Note For details, refer to chapter 10, "Utility mode", of the User’s Guide [Fax Operations]. 4-26 cm6520...
Page 166: Faxing Data Directly From A Computer
In order to use computer faxing, the fax driver must be installed. The fax document settings can be specified. A destination can be selected from the address book. Note For details, refer to chapter 3, "Setting up the fax driver (Windows)", of the User’s Guide [FAX Driver Operations]. cm6520 4-27...
Page 167 Useful fax operations 4-28 cm6520...
Page 168: Useful Scanning Operations
Useful scanning operations...
Page 169: Registering Frequently Used Destinations
Destinations can be registered in the address book or as group destinations. Address book destinations By registering a frequently used destination in the address book, the destination can be recalled simply with the press of an address book button. Opening the destination registration screen cm6520...
Page 170 Useful scanning operations Destination registration screen Registering an e-mail address cm6520...
Page 171 E-Mail Address: Use the keyboard that appears in the touch panel to type in the e-mail address. Note For details, refer to chapter 3, "Specifying Utility mode parameters", of the User’s Guide [Network Scanner Operations]. cm6520...
Page 172 The destinations that can be registered as a group destination must be registered in the address book. In order to register a group destination, the individual destinations must first have been registered in the address book. In the Create One-Touch Destination screen, touch [Group]. cm6520...
Page 173 Useful scanning operations Note For details, refer to chapter 3, "Specifying Utility mode parameters", of the User’s Guide [Network Scanner Operations]. cm6520...
Page 174: Transmitting Fine Text And Clean Images
A document of good quality can be sent by using a combination of these settings. Adjusting the resolution When transmitting fine text and images, an image of better quality can be sent by specifying a higher resolution. cm6520...
Page 175 The higher the resolution, the larger the data becomes. Note For details, refer to chapter 2, "Scanning", of the User’s Guide [Network Scanner Operations]. Selecting an Original Type setting Select the appropriate scanning method for the text and image type of the document. cm6520...
Page 176 Select this setting for documents consisting only of photos. Dot Matrix Original Select this setting for documents consisting of text that generally ap- pears faint. Copied Paper Select this setting for documents with an even density produced using a copier or printer. cm6520...
Page 177 Useful scanning operations If “Text/Photo” or “Photo” is selected, the photo type can be selected. Note For details, refer to chapter 2, "Scanning", of the User’s Guide [Network Scanner Operations]. 5-10 cm6520...
Page 178: Transmitting With The Selected Color And File Type Settings
Transmitting with the selected Color and File Type settings Selecting the Color and File Type settings File Type File type Description This type of file can be displayed in Adobe Reader. An encrypted PDF file for- mat is also available. cm6520 5-11...
Page 179 The Color settings are available when saving scan documents in user boxes, when sending data by e-mail or when transmitting data on a network. The Color settings are not available when faxing or using Internet faxing. Note For details, refer to chapter 2, "Scanning", of the User’s Guide [Network Scanner Operations]. 5-12 cm6520...
Page 180: Transmitting With The Page Number Or Time Added
The page number or date/time can be added to the scanned document. Both the page number and the date/time can be added at the same time. Page number The page number can be added to a document to be sent. cm6520 5-13...
Page 181 Administrator mode. Note For details, refer to chapter 2, "Scanning", of the User’s Guide [Network Scanner Operations]. Adding the date and time The date and time of scanning can be added to a document to be sent. 5-14 cm6520...
Page 182 Useful scanning operations cm6520 5-15...
Page 183 Page numbers can also be added with header/footer settings. The header/footer settings are specified in Administrator mode. Note For details, refer to chapter 2, "Scanning", of the User’s Guide [Network Scanner Operations]. 5-16 cm6520...
Page 184: Transmitting With The Background Color Adjusted
Useful scanning operations Transmitting with the background color adjusted Background Removal When scanning a document with a colored background, a cleaner scan can be created by lightening the background. cm6520 5-17...
Page 185 Useful scanning operations Note For details, refer to chapter 2, "Scanning", of the User’s Guide [Network Scanner Operations]. 5-18 cm6520...
Page 186: Transmitting With Shadows Erased
Useful scanning operations Transmitting with shadows erased Frame Erase Scans can be sent while erasing unwanted areas around the document, such as the transmission information on received faxes and the shadows of punched holes. cm6520 5-19...
Page 187 The same width can be erased on all four sides of the document, or the width that is erased can be specified for each side. The width of the frame to be erased can be set between 0.1 and 50 mm. Note For details, refer to chapter 2, "Scanning", of the User’s Guide [Network Scanner Operations]. 5-20 cm6520...
Page 188: Transmitting To Multiple Recipients
Useful scanning operations Transmitting to multiple recipients Searching for a registered destination Select a recipient registered in the address book. cm6520 5-21...
Page 189 Useful scanning operations Note For details, refer to chapter 2, "Scanning", of the User’s Guide [Network Scanner Operations]. Program destinations Scanning settings, transmission settings and destination can be registered with a single button. These are called "program destinations". 5-22 cm6520...
Page 190 Useful scanning operations Detail Unwanted destinations can be deleted from under "Broadcast Destinations", or the settings can be changed. Note For details, refer to chapter 2, "Scanning", of the User’s Guide [Network Scanner Operations]. cm6520 5-23...
Page 191: Sending Documents By E-Mail
For details, refer to chapter 2, "Scanning", of the User’s Guide [Network Scanner Operations]. Changing the e-mail subject or name of the attached file The subject of the e-mail message and the file name can be changed when sending scan data by e-mail. 5-24 cm6520...
Page 192 Useful scanning operations Document Name: The name of the attached file can be changed. Subject: The subject of the e-mail message can be changed. Note For details, refer to chapter 2, "Scanning", of the User’s Guide [Network Scanner Operations]. cm6520 5-25...
Page 193: Checking Transmissions Performed Until Now
Checking transmissions performed until now Current Jobs/Job History lists The transmission log includes the Current Jobs list, which allows the jobs currently being performed to be checked, and the Job History list, which allows completed transmission jobs to be checked. 5-26 cm6520...
Page 194 Jobs that are being sent and jobs queued to be sent are displayed in the Current Jobs list. Jobs that have been sent are displayed in the Job History list. Note For details, refer to chapter 2, "Scanning", of the User’s Guide [Network Scanner Operations]. cm6520 5-27...
Page 195 Useful scanning operations 5-28 cm6520...
Page 196: Useful Box Operations
Useful box operations...
Page 197: Changing The Name Of A Saved Document
Changing the name of a saved document Edit Name The name of a document saved in a user box can be changed. Documents that were not named when they were saved can be given a name that will be easier to remember. cm6520...
Page 198 The document name is the name of the file sent by e-mail or to an FTP or SMB server. Change the document name after considering the conditions of the destination server. Note For details, refer to chapter 3, "Organizing user box documents", of the User’s Guide [Box Operations]. cm6520...
Page 199: Scanning Double-Sided Documents
Useful box operations Scanning double-sided documents Scan Settings When saving data in a user box from User Box mode, touch [Scan Settings] to change the settings for scanning the document. To scan double-sided documents, select "2-Sided" in the Scan Settings screen. cm6520...
Page 200 Scan Settings screen, be sure to touch [Original Direction] and [Binding Position] in the Original Settings screen, and select the appropriate settings for the loaded document. Note For details, refer to chapter 2, "Saving documents", of the User’s Guide [Box Operations]. cm6520...
Page 201: Automatically Erasing Data From User Boxes
Specify a setting for "Auto Document Delete Time" when registering a user box. Detail To change the Auto Document Delete Time setting for a user box that has already been registered, touch [Edit] for the user box. cm6520...
Page 202 Useful box operations cm6520...
Page 203 Useful box operations Note For details, refer to chapter 7, "Specifying Utility mode paramteters", of the User’s Guide [Box Operations]. cm6520...
Page 204: Printing/Sending Multiple Data Combined
Useful box operations Printing/sending multiple data combined Combine/Bind TX Two or more data saved in user boxes can be printed or sent. cm6520...
Page 205 Useful box operations Specify the order that the data is combined. When "Combine" is selected Specify the Finishing settings, and then print the data. When "Bind TX" is selected Select the destination, and then send the data. 6-10 cm6520...
Page 206 Data saved from Copy mode cannot be sent. If data saved from Copy mode is combined with other data, the data cannot be sent. Note For details, refer to chapter 4, "Printing a user box document" and chapter 5, "Sending a user box document", of the User’s Guide [Box Operations]. cm6520 6-11...
Page 207: Changing Finishing Settings For Saved Data Before Printing
Useful box operations Changing finishing settings for saved data before printing Finishing Before printing data saved in a user box, the finishing settings can be changed. 6-12 cm6520...
Page 208 Center Staple & Fold Select this setting to staple copies at two locations along the center, then fold the copies in half before feeding them out. Tri-Fold Select this setting to fold copies in three before feeding them out. cm6520 6-13...
Page 209 Useful box operations Note For details, refer to chapter 4, "Printing a user box document", of the User’s Guide [Box Operations]. 6-14 cm6520...
Page 210: Performing Box Operations From A Computer
Check various machine information. Check a job. Perform operations with data in user boxes. Direct printing Register/edit destinations. Specify security settings and printer network settings. Note For details, refer to chapter 2, "User Mode", of the User’s Guide [Web Connection Operations]. cm6520 6-15...
Page 211 Useful box operations 6-16 cm6520...
Page 212: Troubleshooting
Troubleshooting...
Page 213 If the machine is not turned on after the indicated items have been checked, contact your service representative. Why does no screen appear in the touch panel? If no operation is performed for a specified length of time, the touch panel goes off and the machine automatically enters a mode where it conserves energy. cm6520...
Page 214 Check that the machine has been turned on by using both the [Power] (auxiliary power) key and the main power switch. Reminder If no screen appears in the touch panel after the indicated items have been checked, contact your service representative. cm6520...
Page 215 If the message remains displayed after the indicated items have been replaced, contact your service representative. Why does the misfeed message remain displayed? A misfeed may have occurred in a location other than that indicated in the screen. Check the location indicated in the displayed screen. cm6520...
Page 216 Image stabilization is performed after a large number of copies have been produced or when there are changes to the temperature or humidity within the machine. When image stabilization is finished, wait until copying automatically continues. Reminder If the image stabilization operation does not end after waiting for some time, contact your service representative. cm6520...
Page 217 When this message appears, turn the machine off with the main power switch, and then wait about 10 seconds before turning it on again. Reminder If the message remains displayed, note the trouble code that appeared in the screen, unplug the machine from the electrical outlet, and then contact the service representative. cm6520...
Page 218: User Settings Parameters
User Settings parameters...
Page 219: Displaying The User Settings Screen
Various settings can be specified from the User Settings screen. Detail To change the default settings for Fax/Scan mode, press the [Fax/Scan] key, and then press the [Utility/Counter] key. Note For details, refer to chapter 11, "Utility mode", of the User’s Guide [Copy Operations]. cm6520...
Page 220: Settings That Can Be Specified
For details on the Printer Settings parameters, refer to chapter 9, "Various settings", of the User’s Guide [Print Operations]. System Settings The display language of the touch panel, the measurement units and settings for the power-saving modes can be changed. cm6520...
Page 221 The display in the left panel of the touch panel screen and the settings in the Basic screen can be changed. Copier Settings The settings for copy functions can be changed so that the operations can easily be performed. Scan/Fax Settings The settings for fax/scan functions can be changed so that the operations can easily be performed. cm6520...
Page 222 User Settings parameters Printer Settings The settings for print functions can be changed so that the operations can easily be performed. cm6520...
Page 223 User Settings parameters cm6520...
Page 224: Glossary
Glossary...
Page 225 This feature sets the machine to Sleep mode at the specified time. The day and time periods when the machine is not used can be specified so the machine can automatically switch to a mode where it conserves energy. cm6520...
Page 226 Index...
Page 227 Punch ..............2-22 Enlarge/Reduce ........... 2-14 Envelope .............. 2-24 Quality adjustment ..........3-13 Fax forwarding ............ 4-26 Registering address book destination ... 4-2 Fax transmission source information setting ..4-12 Registering group destination ....... 4-2 Faxing ..............1-9 10-2 cm6520...
Page 228 Transparency interleave ........3-9 Troubleshooting ............ 7-2 Turning on/off ............x-23 User box destination ........... 1-25 User settings ............8-2 Using saved document ........1-31 Watermark ............3-11 Web Connection ..........6-15 Weekly timer ............2-36 Zoom ..............3-2 cm6520 10-3...
Page 229 Index 10-4 cm6520...

Oce cm6520 Quick Manual

Energy Star

Trademarks and Registered Trademarks

Safety Information

Regulation Notices

Caution Notations and Labels

Space Requirements

Operation Precautions

Introduction to the User's Guides

Available Features

Control Panel

Turning the Machine On/Off

Loading Paper

Clearing Paper Misfeeds

Replacing Consumables

Options

1 Basic Operations

2 Useful Copy Operations

3 Useful Printing Operations

4 Useful Fax Operations

5 Useful Scanning Operations

6 Useful Box Operations

7 Troubleshooting

8 User Settings Parameters

9 Glossary

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Oce cm6520

Summary of Contents for Oce cm6520

Table of Contents