Oce ColorWave 500 Operation Manual page 207

Setting
[Scale]
Preset category: [Image]
Setting
[Print quality]
[Color mode]
[Mirror]
Settings values
[1:1]
[To media size]
[To standard size]
[Custom]
Settings values
• [Océ Print Assistant]
• [High speed]
• [Economy - fast]
• [Production]
• [Quality]
[Color]
[Grayscale]
[On]
[Off]
Advanced settings for print jobs
Function
Scales the image to the original size.
Scales to the selected media width.
NOTE
You can only use this setting, when a specific
media roll is selected.
Scales the image to fit the media size you se-
lect from a list.
Scales the image to a custom percentage.
10 - 1000%
Function
Define the print quality of your output.
• Select [Océ Print Assistant] for an automat-
ic, optimal print quality selection.
• In the print quality range from [High speed]
to [Quality] the quality increases while the
speed decreases.
In case the [Color mode] setting is set to [Gray-
scale] the print quality [Economy - fast] uses
color toner to increase the density of grayscale
prints.
Define the default output in color or grayscale.
[When 'On', the image is mirrored along the
vertical axis (the media transport direction).]
Set to [On] for strongly curled transparent
originals that have to be fed upside down in
the scanner. Or for (dark) transparent originals
that have the information printed on the back.
Chapter 4 - Use the Printing System 207