Configure The Media Sizes - Oce ColorWave 500 Operation Manual

Configure the media sizes

Introduction
You can load various media sizes on the printer. In Océ Express WebTools you can indicate the
media sizes to make them recognizable for the printer.
You can also create custom media sizes.
Procedure
1. Open the [Media] - [Media sizes] tab.
2. Under [Supported media sizes] a list with the supported media sizes is displayed.
3. You can enable or disable media sizes to tune the system to your environment.
NOTE
You cannot disable media sizes that are currently loaded on the printer.
Chapter 3 - Define your Workflow with Océ Express WebTools
Configure the media sizes
171