Set The Spool Threshold - Oce ColorWave 500 Operation Manual

Set the spool threshold

Set the spool threshold
Introduction
When the job memory is full the printer cannot receive new jobs, therefore it is necessary to
partly empty the memory. Set the [Spool threshold] setting to define the spool capacity for your
jobs.
You can choose one of following values:
• [Low]
Select this value if you have several small print jobs and you want to allow a higher capacity.
• [Normal]
This is the default setting. Select this value if you have both small and large print jobs.
• [High]
Select this value when you have more large print jobs, and you want to reduce the risk of
having to abort the file transfer due to a full job memory.
Procedure
1. Open the [Preferences] - [System defaults] tab.
2. Click on [Edit] in the [Printer properties] section or click on the [Spool threshold] setting.
3. Select [Low], [Normal], or [High].
Select [Low] if print productivity is an important factor.
4. Click [Ok] to confirm, or [Cancel] to reject your entries.
136 Chapter 3 - Define your Workflow with Océ Express WebTools