Imanager; Fig. 6.27: Imanager: Gpio Bank Control - Advantech DLT-V83 SERIES Manual

Configuration
6.8.1.

iManager

The "iManager" offers embedded firmware that can be used to manage and test the onboard
devices simply and independently from the operating system. This improves system stability and
compatibility.
The "iManager" offers a collection of standardized APIs for hardware monitoring, GPIO
selection/analysis, Multi-Level-Watchdog and more.
In the area GPIO Bank Control, outputs DO1 to DO3 can be set and inputs DI1 and DI2 can be
queried:

Fig. 6.27: iManager: GPIO Bank Control

Information about the "iManager" is available in the Internet at
http://www.advantech.de/embcore/imanager.aspx.
Hardware details such as the pin assignment of the CAN and Digital I/O interfaces are described
here in the manual in:
Chapter 13.4 CAN, digital I/O and second Ethernet interface (optional)
Page 42 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG