Omron NJ501-1500 Reference Manual page 48

1 Instruction Set
Type Instruction
SD Memory FileWriteVar
Card Instruc-
tions
FileReadVar
FileOpen
FileClose
FileSeek
FileRead
FileWrite
FileGets
FilePuts
FileCopy
FileRemove
FileRename
DirCreate
DirRemove
Other Instruc- ReadNbit_**
tions
WriteNbit_**
ChkRange
GetMyTaskStatus
Task_IsActive
Lock
Unlock
Get**Clk
Get**Cnt
• Refer to the NJ-series Motion Control Instructions Reference Manual (Cat. No. W508) for the specifi-
cations of the motion control instructions.
• Refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504) for the specifications of the
simulation instructions.
1-16
Name
Write Variable to Writes the value of a variable to the specified
File file in the SD Memory Card. The value is writ-
ten in binary format.
Read Variable from Reads the contents of the specified file on the
File SD Memory Card as binary data and writes it
to a variable.
Open File Opens the specified file in the SD Memory
Card.
Close File Closes the specified file in the SD Memory
Card.
Seek File Sets a file position indicator in the specified file
in the SD Memory Card.
Read File Reads the data from the specified file in the SD
Memory Card.
Write File Writes data to the specified file in the SD Mem-
ory Card.
Get Text String Reads a text string of one line from the speci-
fied file in the SD Memory Card.
Put Text String Writes a text string to the specified file in the
SD Memory Card.
Copy File Copies the specified file in the SD Memory
Card.
Delete File Deletes the specified file from the SD Memory
Card.
Change File Name Changes the name of the specified file or
directory in the SD Memory Card.
Create Directory Creates a directory with the specified name in
the SD Memory Card.
Delete Directory Deletes the specified directory from the SD
Memory Card.
N-bit Read Group Reads zero or more bits from a bit string.
N-bit Write Group Writes zero or more bits to a bit string.
Check Subrange Determines if the value of a variable is within
Variable the valid range of the range type specification.
Read Current Task Reads the status of the current task.
Status
Determine Task Determines if the specified task is currently in
Status execution.
Lock Tasks Starts an exclusive lock between tasks. Execu-
tion of any other task with a lock region with
the same lock number is disabled.
Unlock Tasks Stops an exclusive lock between tasks.
Get Clock Pulse Outputs a clock pulse at the specified cycle.
Group
Get Incrementing Gets the values of free-running counters of the
Free-running specified cycle.
Counter Group
Function
NJ-series Instructions Reference Manual (W502)
Page
2-794
2-799
2-803
2-806
2-809
2-812
2-819
2-826
2-833
2-840
2-848
2-852
2-857
2-860
2-864
2-866
2-868
2-870
2-873
2-875
2-875
2-880
2-881