3. Installing the CPX-1000
Attach the
Mounting
Flanges
Step 1
Install second set
of flanges after
mounting shelf in
rack.
3-12
The CPX ships with a pair of reversible mounting flanges for either
a 19-inch or a 23-inch standard or seismic rack. One orientation of
the mounting flanges fits a 19-inch rack, and the reverse
orientation fits a 23-inch rack.
Note
These flanges work in EIA310, Bell Narrow, and Bell
Wide racks. Installation in NEBS2000 racks requires
special mounting flanges, a separately orderable option.
Attach the flanges to the CPX chassis with the 10-32 pan head
screws with integral-toothed lock washer (provided).
Mounting Flanges in 19" Configuration
Top View
Mounting Flanges in 23" Configuration
Top View
Use second set of flanges in
seismic racks with 3" deep
side rails.
1000-A2-GN22-00
Install second
set of flanges
after mounting
shelf in rack.
0486
February 2003