Paradyne Jetstream CPX-1000 Installation And Operation Manual page 140

B. Pin Assignments and Indicators
Table B–1. Connection Requirements and Physical Layer
Specifications
Connections
ATM packet network
(OC-3 fiber optic cables)
ATM packet network
(DS-3 coaxial cables)
B-2
Cables, Connectors, and Specifications
Physical interface:
Xmt power:
Multi-mode
Single mode
Rcv power:
Multi-mode
Single mode
Wave length:
Framing type:
Logical interface:
Max. span length:
Physical interface:
Impedance:
Max. span length:
Termination:
Signal amplitude:
Xmt power:
Transmission rate:
Framing type:
Logical interface:
Line coding:
1000-A2-GN22-00
Short-haul, SMF or MMF, OC-3
fiber optic cable
ATM module is a 155-Mbps
SONET bridge between the cPCI
bus in the CPX-1000, and the
external ATM network.
1 9 to 1 4 dBm (nominal)
− −
1 5 to 8 dBm (nominal)
− −
4 4.5 dBm to 8 dBm
− −
3 4 dBm to 8 dBm
− −
1310 nm (typical)
C-bit parity
UNI
SMF 5000m; MMF 550m
DS-3 short-haul coaxial cable
ATM module is a 44.736 Mbps full
duplex link between the cPCI bus
in the CPX-1000 and the external
ATM network.
75 (nominal)
450 ft. of 734A or equivalent
coaxial cable
Dual socket BNC coaxial
connectors
±1.75 volts ±10%
-4.7 to +3.6 dBm
44.736 Mbps full duplex
C-bit parity
UNI
B8ZS
February 2003