Repair Procedures; Recommended Power Off; Emergency Power-Off - Paradyne Jetstream CPX-1000 Installation And Operation Manual

Recommended
Power Off
Step 1
Step 2
Emergency
Power-Off
February 2003
C

Repair Procedures

Use these procedures when removing or installing components:
Power supplies and fans (page 5-2)
Alarm panel (page 5-4)
Power distribution panel (page 5-5)
Module removal (page 5-7)
Hot swap (page 5-10)
Hot growth (page 5-13)
Power Off cuts input power to all power supplies. In dual-
configured systems, both domains lose input power. This
procedure is recommended when powering off the CPX:
Shut down all software operations (JetVision, JetCraft).
Flip the rocker switch in the rear of the shelf to the "0" position.
In the event of an emergency, flip the rocker switch in the rear of
the chassis to the "0" position. This removes input power from the
power supplies and results in an abnormal system shutdown.
Voice/Data Interruption
Emergency power-off interrupts all traffic through the CPX.
H A P T
5
E R
5-1