Do Not Service Internal Assemblies; Do Not Work Alone; Do Not Modify Or Substitute Parts/Equipment; Aisle Requirements - Paradyne Jetstream CPX-1000 Installation And Operation Manual

1000-A2-GN22-00
Do Not Service
Internal Assemblies

Do Not Work Alone

Do Not Modify or
Substitute Parts/
Equipment
Aisle
Requirements
Environmental
Requirements
February 2003
Do not attempt internal service or adjustment except as specifically
directed to do so by Paradyne personnel.
Do not work alone when handling high voltage components or
working on power supplies and related connections.
Because of the danger of introducing additional hazards, do not
install substitute parts or perform any unauthorized modification
of the equipment. To ensure that safety features are maintained,
contact your local Paradyne representative for service and repair
questions and information.
Maintain at least 30 inches aisle space for equipment mounting and
wiring, and at least 42 inches aisle space for maintenance purposes.
30 " min. clearance
for mounting and wiring
42" for maintenance
The equipment's ventilation systems allow you to mount each CPX
on a rack directly on top of another CPX.
Always operate the CPX within these conditions:
Operating temperature: 5
Operating humidity: 5% to 85% RH, non-condensing
Altitude: up to 4000 meters (12,400 feet)
3. Installing the CPX-1000
12.5 to 13.63 inches (adjustable)
for cable management trough
6 inches overhang
front and rear of shelf
C (41 F ) to 40
° °
30 " min. clearance
for mounting and wiring
42" for maintenance
C (104 F )
° °
3-7