Servo-Cutting Device; Rapid Approach; Coolant System; Hydraulic Power Unit - DoAll c-530 nc Instruction Manual

Be sure the blade is not cutting the machine frame
Keep lubricated all the bearings

14.2.9 Servo-cutting device

Servo cutting assembly Dwg. 066/17
Check the servo-valve adjusting the cutting pressure. Turn the knob
Open the servo-valve cover and check the vertical movement of the unit.

14.2.10 Rapid approach

Check that the rapid approach limit switch is in working properly
14.3

COOLANT SYSTEM

Check the reservoir level and, if necessary, add oil type OSO46.
14.4

HYDRAULIC POWER UNIT

Keep the pressure to 55 bar.
14.5

ELECTRIC CONTROL PANEL

Replace, if necessary, broken components.
Instruction Manual
03-042 Manufacturer
03-051
Pos. Tool
Spanner
Pag.42
Edition A