Table of Contents
Advertisement
6. TECHNICAL DESCRIPTION
6.1. M
ACHINE STRUCTURE
This saw is manly made by :
1. Base frame
2. Cutting bridge
3. Hydraulic power unit
4. Control Panel
5. Coolant system
Pos.
6.1.1.
Base frame
6.1.2.
Chip conveyor
6.1.3.
Indexing (Only for automatic machines)
6.1.4.
Vises (Only for automatic machines)
6.1.1. Base frame
The machine frame is welded and machined. The material used is Fe 37. In the weldment there are two reservoirs, one for
the coolant liquid, and the second for the hydraulic oil.
The frame is machined to avoid corners or abrasive points that could be dangerous. It is painted with two layers of paint, the
first of which prevent corrosion.
It is machined to be assembled with other machine components.
6.1.2. Chip conveyor
It is standard on automatic machines and optional on semi-automatic machines, and it is made by :
• Bended and welded frame with Fe37 steel.
• Hydraulically powered chip screw.
• Protective brackets.
• Chip tank
• Coolant reservoir
The chip conveyor removes chips coming from the band brush and from the cut, taking them outside the machine.
6.1.3. Indexing
Used only for automatic machines, it includes :
• Index frame welded and machined , and made using Fe37 steel.
• Precision ball bearing screw, to move backward and forward the index frame.
• Steel vises to clamp the material, controlled by hydraulic cylinders.
Instruction Manual
Tab 6.1. Base frame
Pag.17
Edition A
Advertisement
Table of Contents
