Information Filtering - Huawei AR150 Series Configuration Manual

Huawei AR150&200&1200&2200&3200 Series Enterprise
Routers
Configuration Guide - Device Management
Table 3-3 Relationship between default channels and output directions
Chan
nel
Numb
er
0
1
2
3
4
5
6
7
8
9

3.2.4 Information Filtering

To control information output flexibly, the information center provides the information filtering
function. After the device works properly, each module reports information during service
processing. To filter unwanted information about a service module or of certain severity,
configure the filtering function.
The information center filters information in a channel through the information filtering table.
The information filtering table is used to filter information output to different directions based
on information types, severities, and sources.
The content of the information filtering table is as follows:
l
l
l
l
Issue 05 (2014-01-16)
Default Output
Channel Direction
Name
Console Console
Monitor Remote
terminal
loghost Log host
trapbuffer Trap
buffer
logbuffer Log buffer
snmpagent SNMP
agent
channel6 Unspecifie
d
channel7 Unspecifie
d
channel8 Unspecifie
d
channel9 Logfile
Number of the module that generates information
Log output status
Log output severity
Trap output status
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Information Center Configuration
Description
Outputs logs, traps, and debugging messages to the
local console.
Outputs logs, traps, and debugging messages to the
VTY terminal for remote maintenance.
Outputs logs, traps, and debugging messages. The
information is saved to the log host in file format for
easy reference.
Outputs traps.
Outputs logs.
Outputs traps.
Reserved. You can specify an output destination for
this channel.
Reserved. You can specify an output destination for
this channel.
Reserved. You can specify an output destination for
this channel.
Outputs logs, traps, and debugging messages.
23