Default Configuration - Huawei AR150 Series Configuration Manual

Huawei AR150&200&1200&2200&3200 Series Enterprise
Routers
Configuration Guide - Device Management
Outputting Debugging Messages to the Console
As shown in
center sends debugging messages to the console, and the maintenance personnel debugs the
device based on the debugging messages.
Figure 3-7 Outputting debugging messages to the console
Router

3.4 Default Configuration

This section describes default parameter settings of the information center.
Table 3-6 Default parameter settings of the information center
Parameter
Information center
Maximum number of logs in the log buffer
Maximum number of traps in the trap buffer
Log file size
Maximum number of log files that can be
saved
Log host IP address
Timestamp format
Default Output Rules of Information Channels
Default output rules define information modules to which different types of information can be
output, lowest information severity, and information channels. See
Issue 05 (2014-01-16)
Figure 3-7, the information center is configured on the device. The information
Console
PC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Information Center Configuration
Default Setting
Enabled
512
256
8 MB
200
None
date
Table 3-7.
28