Example For Configuring Authenticated Ntp Broadcast Mode - Huawei AR150 Series Configuration Manual

Huawei AR150&200&1200&2200&3200 Series Enterprise
Routers
Configuration Guide - Device Management
peer dispersion: 10.96 ms
reference time: 06:55:50.784 UTC Mar 7 2012(C7B7ACF6.C8D002E2)
----End
Configuration Files
l
l
l

5.7.3 Example for Configuring Authenticated NTP Broadcast Mode

Networking Requirements
As shown in
RouterA directly connects to RouterF. RouterC directly synchronize its clock to a standard clock
by radio.
All routers except RouterA on the LAN are required to synchronize their clocks to the standard
clock.
Issue 05 (2014-01-16)
Configuration file of RouterC
#
sysname RouterC
#
interface GigabitEthernet1/0/0
ip address 10.0.0.1 255.255.255.0
#
ntp-service refclock-master 2
#
return
Configuration file of RouterD
#
sysname RouterD
#
interface GigabitEthernet1/0/0
ip address 10.0.0.2 255.255.255.0
#
ntp-service unicast-server 10.0.0.1
#
return
Configuration file of RouterE
#
sysname RouterE
#
interface GigabitEthernet1/0/0
ip address 10.0.0.3 255.255.255.0
#
ntp-service unicast-peer 10.0.0.2
#
return
Figure 5-13, RouterF, RouterC, and RouterD are on a local area network (LAN).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 NTP Configuration
120